You are bidding on a Fischer EPX2 Biplane System:
Pulled from a working environment.
Fischer EPX2 Biplane System:
• For cardiac imaging in the electro physiology laboratory
• Consists of a ceiling mounted C-Arc within a C-Arc
• With two 9 inch triple mode imaging intensifier systems
• CCTV with real-time video enhancement and pulsed progressive fluoroscopy
• 2 heavy-duty x-ray tubes with fractional focal spots
• Two computer controlled high frequency generators
BIPLANE POSITIONER
Ceiling mounted C-Arc within a C-Arc motorized positioner for intensive fluoroscopic procedures. Variable height. Isocentric rotation of the RAO/LAO axis is from 0 degrees PA to 90 degrees RAO and 120 degrees LAO. Angulation between RAO and LAO is variable, from 77 degrees to 150 degrees difference, with electronic motor control. Electronic motor control utilizes operator control at tableside. Variable source-to-image distance (SID): 83 to 102 cm SID, motor driven with a speed of 1.5" per second towards isocenter and 2" per second away from isocenter.
DISPLAY
Digital display of all angles of positioner and table height.
COLLIMATOR (2)
Two auto Iris type collimators, integrated within C-Arcs, includes motorized rotatable parallel shutters
CONTROLS
Remote control stand capable of moving all motorized axes simultaneously while not affecting and x-ray acquisition.
X-RAY TUBE (2)
Rotating anode x-ray tube with 0.6/1.2mm focal spots, 32/76kw, 3" 8.5 degree compound RTM target, 300,000 HU, Installed Inside EP-X C-arm
Models B-100T, B-100, Mfg: Varian; Mfg Dates: August 2003 & July 1999
Pair of 60 ft. high-tension cables.
IMAGING SYSTEM
Fischer 9" single port imaging system includes 9/6/4.5" Tri-mode image intensifier tube, housing a power supply, collimating lens, photo detector for ABS, and 90 degree folded optical light distributor.
110 LPI, 10:1 ratio carbon fiber interspaced grid kit.
GENERATOR (2)
MICRO X-15HF radiographic and fluoroscopic generator, high frequency, computer controlled, including rotor drive, tube heat integrator, automatic TV brightness control, programmed radiography and self-diagnostic program. Touch controls throughout.
Rating:
125 mA @ 120 kVp (15 kW)
100 mA @ 125 kVp
Fluoroscopy: 1 to 20 mA @ 120 kVp, continuous
Pulsed progressive fluoroscopy adaptation for generator
Pulse: 25 mA @ less that 5 Milliseconds
Pulse rate Operator selectable
30, 15, 7.5, 3, 1, 0.5 pulses per second with automatic brightness stabilization
BIPLANE EPIC ELECTROPHYSIOLOGY IMAGING COMPUTER WITH STANDARD HIGH RESOLUTION PULSED PROGRESSIVE FLUROSCOPY (PPF)
Epic Computer: ECG gating allows for image acquisition at a predetermined point in the cardiac cycle. Operator selectable multiple channel ECG overlay with variable gain and sweep. On screen video pointer. Digital disc control with 486 control PC. Includes four 12” review display monitors.
Fischer Video Processor and scan convertor for pulsed progressive fluoroscopy. Two memories provide operator selectable real time edge enhancement, dual frame last image hold, digital snapshot and subtraction for roadmapping. Scan convertor permits operator to select PPF pulse rates. Digital disc permits 400 images to be stored at multiple images per second or as individual elements. Image collage of 16 images on a single monitor.
Manual rotation yoke FD-500 solid state CCTV camera with 525 progressive line scan rate, selected Plumbicon tube, dynamic range compression, automatic black level, circular blanking, vertical and horizontal sweep reversal, AGC.
20” (51cm) display monitor, without image rotation.
MONITOR MOUNT
Raves ceiling mounted, variable height monitor support with an 8 ft. transverse bridge for five monitors, configured as a single customer supplied slave monitor flanked on both sides by x-ray monitors in a one-over-one configuration. Customer supplied slave monitor must not exceed 20” diagonal. Mount permits monitors to be viewed from either side of the exam table. Supplied with 9’6” longitudinal rails and bump pad.
TILTING EXAMINATION TABLE
Tangent VI floor mounted tilt table. Cantilevered 80” (203cm) carbon fiber table top with 40” metal free head end and 80” of unobstructed viewing for whole body exams 88degree/20degree tilt with 12” (31cm) vertical elevation, with 12” (30cm) of transverse travel. Removable digital display/operator’s console with fast tilt override. Table base rotates +90 degree for easy patient access. (Specifications subject to change)
Table accessories kit, includes:
• One (1) tablepad, rip resistant and liquid proof (61614-2)
