New Medical Equipment Surplus Liquidation Auctions

Advances incorporated into the T-2100 treadmill place
it at the forefront of patient safety, dependability and overall
performance – the culmination of continual technological
development and attention to detail specially designed to
meet the high quality standards you expect from GE.
The T-2100 treadmill’s extra-long, 60-inch surface provides
an extra margin of safety for patients. Its zero start feature
slowly builds up speed for safe and smooth operation.
And it can be slowed to a gradual stop, or stopped
immediately with the standard emergency stop button.
Full front and side handrails are also standard on the
T-2100 treadmill.
With fewer moving parts than other treadmills, the T-2100
treadmill delivers extremely smooth, quiet operation that
facilitates accurate blood pressure measurements even at
high workloads. Thanks to digital microprocessor control,
its settings never need to be calibrated. And a 450-pound
weight capacity and speed range of 0-13.5 miles per hour
set the T-2100 treadmill apart from other devices.

Features:
# Extra-long, 60-inch surface provides an extra margin of safety for patients.
# Zero start feature slowly builds up speed for safe and smooth operation.
# Standard stop button enables a gradual stop.
# Emergency stop button provides immediate stop.
# Full front and side handrails are standard.
# 450 lb weight capacity
# 0 to 13.5 mph speed range.
# 0 to 25 percent grade range.
# Enhanced tolerance to electrical changes for greater patient safety.
# Self-calibrating for speed and grade.
# Digital control insures precise speed and grade control.
# US power cord with wall connector.

Physical specifications
# Weight: 400 lbs (181.4 kg)
# walking area: 18in x 60in (45.7cm x 152.4 cm)
# Floor space required: 29in x 77in (73.7 cm x 195.6 cm)
# Handrail height above walking surface:

* Front: 40in (101.6 cm)
* Side: Maximum 35in (88.9 cm) descending at a 5° angle to 32in (81.3 cm)

Environmental Specifications
# Power requirements:

* 208 to 240 VAC
* 50/60 Hz
* Single-phase
* 20 amperes
* NEMA 6-20 R wall socket (dedicated circuit recommended)

Operating conditions
# Ambient temperature: 50° F to 95° F (10° C to 40° C)
# Relative Humidity: 15% to 90%

Storage conditions
# Temperature range: 0° F to 120° F (-18°C to 49° C)
# Relative Humidity: 15% to 90%

Performance specifications
# Maximum rated load: 450 lbs (204 kg)
# Belt speed range: 0 to 13.5 mph at 220 VAC/60 Hz continuously variable; 0 mph start-up
# Driver motor: 3.0 hp
# Elevation motor: 1/10th hp
# Elevation range: 0 to 25% grade, continuously variable
# Maximum leakage current: 100µA, chassis to groung

GE Healthcare T2100 Treadmill Brochure

The equipment has never been used and is still in its original packaging.

You are free to inspect this equipment but if you want to inspect the equipment please do so before you bid. If you would like to arrange to inspect this equipment click on "Email Seller" above.

The equipment is located in Eastern Pennsylvania.

The equipment will be available immediately upon receipt of payment in full.

This equipment is offered in accordance with the "Auction Terms" and "Legal Notice" of www.dotmed.com.

This is brand new equipment and is in the original carton.

This equipment is offered with a 48 hour Dead On Arrival (DOA) warranty, excluding the cost of shipping, from the seller.

"Dead On Arrival" or "DOA" is defined as: Upon Buyer receiving an item,
the Buyer observes that the item is physically broken or does not function
as the manufacturer intended it to function.

The DOA warranty does not cover instances where the equipment did not work
for the Buyer's specific application or that additional parts or software
are required to use the item. The DOA warranty does not cover any cosmetic defects. The DOA warranty is not a satisfaction guarantee.

Additionally, this equipment may be covered by a manufacturers warranty, but the seller makes no claims and offers no guarantee that the manufacturer will honor any warranty. It is the Buyer's responsibility to determine if such warranty exists.

GE Healthcare Warranty Statement (United States)

The Successful Bidder agrees to remit payment in full within 48 hours of the Auction's close.

If the Successful Bidder fails to remit payment according to the schedule described above, then the equipment will be sold to the next highest Bidder.

Packing, Crating and Transportation will be paid by the Successful Bidder.

Title will transfer from the Seller to the Successful Bidder upon payment in full.