Back to DOTmed Forums

VALLEY LAB FORCE 40 SERVICE MANUAL
by Miguel Cervantes on November 10, 2005 
Hi

I am Looking for the service manual  of the Force 40.If someone
has this, please sell me a copy Thanks
[ Login to Reply ]


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by S Govindarajan on December 16, 2005
In response to: Miguel Cervantes
I have a xerox copy of FORCE 30/40.In case you dont mind,i can
xerox it and send.
G.Rajan -----indianhosp@hotmail.com


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by eddie tan on July 20, 2008
In response to: S Govindarajan
hi 
 i need Force 30/40 service manual badly ,
 can you send it to me furiousdragon@imap.cc.
 if you can you are my life save 
 i like to thank you in advance.\\
eddie


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Gilberto Martodimedjo on November 12, 2008
In response to: eddie tan 
hi ,
 i am also in need of the service manual for the force 40 ESU. is
it possible to send a copy via e-mail?
the problem i have with this unit is that the ESU works fine with
the surgical pencil with rockerswitch, but when used with
monopolar footswitch there is no current delivered..

can you assist in this problem?


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Chris Baklik on November 12, 2008
In response to: Gilberto Martodimedjo
I maybe able to help e-mail back at crisb1955@aol.com


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Laiq Ahmed on June 04, 2009
In response to: Chris Baklik
Dear Chris
Can u send me the manual also please.
laiq_ahmed@yahoo.com
thanks in advance & regards
Laiq


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Laiq Ahmed on June 04, 2009
In response to: Gilberto Martodimedjo
Hi Gilberto
I have been searching for FORCE 40 service manual also. I have a
cut/coag setting problem, as it starts to work after setting of
50 or so. At lower settings it is not working. Can u send me the
service manual so that i can calibrate it.
My other email address is laiqahmed@gmail.com
Thanks in advance


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Garth Ellwood on June 11, 2009
In response to: S Govindarajan
Hi, Is	a copy of the 
force 40 Service manual still available.
I also am in need of one.
If so can you e-mail, fax or mail i will of course pay charges. I
have A ups #:
Best regards, Garth.
gseintenet@hotmail.com


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Sukisman Suhardi on June 14, 2009
In response to: S Govindarajan
Hi,
I am also got problem with loop error when
start up on force 40 VL esu, could you please
send me a copy ? will able for shipping cost.
Thanks,

Sukisman.
kishardi@yahoo.com


Re: VALLEY LAB FORCE 40 SERVICE MANUAL
by Tomasz Grabowski on November 02, 2009
In response to: Sukisman Suhardi
Hi There this is on the web  scanned and free

http://www.gtsmedical.com/docs/72/Valleylab_Force_30_40.pdf

Regards 
Thomas

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2009 DOTmed.com, Inc.
ALL RIGHTS RESERVED