Sorvall RC-3C Plus Centrifuge
This unit is fully refurbished with a 90 day warranty. When placing inquiry please include what rotor (what size tubes, how many, and if you want a swinging bucket or fixed angle) you would like, your company name, address, phone, and fax number so we can get you a formal quotation. We also have all the parts and service available for this unit.
The Sorvall RC-3C Plus is a large capacity, versatile, quiet, and reliable centrifuge for low speed (to 6000 rpm) work designed to meet the needs of research and clinical laboratories, blood banks, and plasmapheresis centers.
--------------------------------------------------------------------------------
RC-3C Plus Description
The Sorvall RC-3C Plus centrifuge system has a fan-cooled motor with automatic programmed acceleration and braking.ﾠ The motor is balanced to ensure smooth, quiet operation over its full speed range and to promote long life for the brushes and bearings.ﾠ A gyro-action drive with a square spindle drive shaft accepts a variety of SORVALL rotors.ﾠ A clear acrylic viewing port located in the center of the chamber door permits calibration of rotor speed with a strobescope.
The refrigeration system consists of a low-temperature condensing unit with a twin cylinder, hermetically-sealed power assembly (motor and compressor), a finned condenser and two fans.ﾠ The cooling system is designed to maintain chamber temperature within 1 Deg. of setpoint.
--------------------------------------------------------------------------------
RC-3C Plus includes the following safety features
Protective, armor plate steel guard within the cabinet.
Automatic shutoff of the drive motor for overspeed protection and ot the refrigeration motor to prevent damage from overheating.
Electrical circuit breakers on the main power and the control panel circuits.
Operating controls which may be changed during operation without damage to the centrifuge.
A door interlock which prevents opening the chamber door while the rotor is in motion and/or starting of th rotor driove while the door is open.
--------------------------------------------------------------------------------
RC-3C Plus Specifications
Temperature
Cahmber Temperature Controlled within 1 Deg. C of Set Temperature...from 0 Deg. to 30 Deg. C.
Maximum Operation Speed
(Controlled within 1% of Set Speed or +- 20 rpm, whichever is greater)...6000 rpm.
--------------------------------------------------------------------------------
Dimensions
Width...76.2 cm (30 inches).
Height...94.0 cm (37 in.) to top deck - 120.6 cm (47.5 in.) to top of control panel.
Depth...102.6 cm (40 in.)
Rotor Chamber Diameter...58.4 cm (23 in.)
--------------------------------------------------------------------------------
Electrical Requirements
Can be supplied for use on the following single phase power sources:
200 V, 50/60 Hz
208 V, 50/60 Hz
220 V, 50/60 Hz
230 V, 50/60 Hz
240 V, 50/60 Hz
Circuit Breakers... 30A (Main POWER Switch)
Current...24A
Receptacle...receptacle No. 9330 or equivalent
Average Heat Output During Operation...3.2 kW (11,000 BTU/h)
Mass...307.5 kg (678 lbs.)
--------------------------------------------------------------------------------
More RC-3C Plus Features
Programmed operation which automatically establishes prerecorded run conditions and completely controls centrifuge operation.
RCF values can be calculated prior to a run and can be displayed durin a run, except during programmed operation.
Automatic temperature compensation for a variety or SORVALL Centrifuge rotors.
Automatic rate-controlled slow start/stop can be selected.
Multiple braking rates available for the H-2000B, H-4000, and H-6000 Rotors.
Automatic diagnostic indicators that alert you of a system malfunction should one occur, plus advisory messages that come on to call your attention toﾠa system staus that requires correcton.
Automatic self-test routine by the microcompter, everytime the centrifuge is started the micorcomputer will go through a routine check to ensure its proper performance.
--------------------------------------------------------------------------------
There are 2 main rotors on this unit. There is a 6x1 liter wind shielded rotor, and a 4x1 litter wind shielded rotor. Both rotors have the ability to have several different inserts to fit many different tube sizes.
The information on the 6x1 litter rotor is:
Sorvall H-6000A Rotor
The Sorvall H-6000A is a six-place swinging bucket rotor designed for use in the Sorvall RC-3B, RC-3B PLUS, RC-3C, RC-3C PLUS General Purpose Automatic Refrigerated Centrifuges.
The H-6000A Rotor consists of a stainless steel rotor body, and aluminum alloy windshield and cover, and six 1000 ml aluminum alloy buckets which can hold plastic bottles for large amounts of sample, blood bags, or reducing adapters that accept numerous smaller tube sizes.
--------------------------------------------------------------------------------
Sorvall H-6000A Rotor Specifications
Diameter = 55.4 (cm).
Mass = 24.95 (kg).
Number of Places = 6.
Max. Rotor Speed at 4 Deg. C. (rpm) ^2 = 5,000.
Max. RCF (g force) = 7,280.
K Factor at Max. Speed = 8674.6.
Max Compartment Mass (g) = 2575.
Critical Speed = 450 (rpm).
Rotor Code = 20 - 29.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
