You are bidding on a 2004 Fischer SenoScan: Has two 5 megapixel flat monitor. This unit was installed in 2005. 2005 SenoScan Enterprise Digital Acquisition System: -SenoScan Trueview digital mammography scanning system is designed to perform screening and digital magnification diagnostic mammography procedures.                          DICOM MG Output of SenoScan Acquired Images: -Open Architecture Allows for Integration with a Network or PACS -Inter-connectivity with any Fischer approved Softcopy Review Work Station or any FDA 510(k) cleared PACS workstation for diagnostic read of digital mammograms Includes Client Server and     Administrative Workstation           SenoScan Gantry: -0.3 mm, 8 kW, 4-Inch (102 mm) Rotating Anode Tungsten/Rhenium X-Ray Tube includes Heat Unit Exchanger for high capacity patient throughput                          -Telescopic Elevating Column      -Motorized Elevation -Motorized or Manual Gantry Rotation      -LED Display of Angle                -2x Dual Footswitch for Motorized Compression/Rotation/Elevation      -Rapid Release Paddle De-Compression                 -Rapid Speed -Gantry Rotation                -Operator Radiation shield                -Carbon Fiber Breast Support                -Paddle Set Provided                -Compression Paddle (24 x 30 cm)                -High Resolution Paddle (10 x 15 cm)                -Spot Compression Paddle (5 x 7 cm)                -Removable Recessed Patient Face Shield                           SenoScan High Resolution Detector: -CCD Slot Scan Detector                     -Active Detector Area-10-mm X 210-mm                     -4096 x 5625 Matrix Size                     -Single Button Selection of Field of View (FOV)                     -21cm x 29cm FOV 50 Micron Pixel- Screening Mode                 -10 1p/mm Spatial Resolution                     -11cm x 15cm FOV 25m Micron Pixel- Diagnostic Mode               -14 1p/mm Spatial Resolution                     SenoScan Acquisition Work Station (AWS): -High Performance CPU                               -Minimum of 40 GB Hard Disk                               -Radiation Shield: 190 cm x 40 cm (75 in x 28 in)               -19" Flat Panel Color Monitor on Pivot Mount for User Selectable Viewing Position                               -1.79 GB Dimm Memory                                -SenoScan Application Software                                -Security Log-on (User Name/Password)                    -Automatic Technique Recommendation (ATR)                    -User Definable Software Workflow Protocols/Attributes               -Keyboard/Mouse                               -100 Base T Ethernet Network Interface                                SenoScan CLIENT SERVER AND ADMINISTRATIVE WORKSTATION (105473G): -High Speed Server with Capacity for up to 3 SenoScan Gantries to a single RWS                                    -Image File Server (including Image Processing)                    -Patient File (DB) Server                              -Dual Mirrored 72 GB Hard Drive (56 GB Useable)                    -4GB Dimm Memory                                     -DICOM Output                                    -DICOM Store and Query/Retrieve (94184)                         (DICOM Store Service Class User (SCU) for the SenoScan Digital Scanning                                     Mammography System. This feature provides the ability to store SenoScan Studies                                     to a DICOM Store- Service Class Provider (SCP) archive). Requires a validated                                     DICOM Store-Service Class Provider (SCP) archive, which is NOT included in                                     this pricing. PACS archive provider may require additional interface charges.                                     -ICOM Modality Worklist and DICOM Print are Optional.                                     SenoScan Operator (P-55943-OM): -Single Phase- Manuel English      Single-Phase Generator (105289G): -8 kw                -20-45 kvp                -80-220 Ma                -Single-phase 240 vac, 50-60 Hz (standard)                           SENOLINK REMOTE DIAGNOSTICS VPN #105246; MODEM #105250G SenoScan OPEN GRID NEDDLE LOCALIZATION PADDLE: -18 cm x 24 cm-3,14 inches wide x 1.57 deep (.16 inches from front edge)-x                                    axis: Letters (A-J- y axis: Numbers (0-4) DICOM PRINT (94189): If this interface is to an existing printer, the printer manufacturer may levy additional interface charges. These charges are the responsibility of the customer.       SenoScan issues Print Management requests to a remote SCP supporting the DICOM V3.0 Print Services, in order to produce hard copy representations of DICOM images. SenoScan transfers DICOM images to a Print Services SCP upon request from the SenoScan user. When an image is to be printed, SenoScan initiates the negotiation of an associatin with the requested Print Services SCP. If                                          the association is accepted, the images are transferred from the SenoScan SCU                                          application to the Print Services SCP over that association. Once the transfer is complete, SenoScan releases tha association                                         DICOM MODALITY WORKLIST (94309): A HIS/RIS gateway (i.e. PAC'S broker is required. FIC does not provide this gateway. Please consult with your IT department of HIS/RISprovider regarding gateway.      SenoScan imports a DICOM Modality Worklist from a HIS/RIS system.                                    SenoScan initiates an association with HIS/RIS system SCP. This funtionality will deliver patient deomographics to the SenoScan acquisition workstation upon completion of the study. The HIS/RIS system is notified at the completion of the study. DOCUMENTATION PACKAGE: Operator and Service Manual SECTRA Breast Imaging Workstation (Standalone) MW0300: The SECTRA Breast Imaging Workstation is appropriate for installations comprising either one or two Mammography Workstations that will utilize an existing PACS image server/archive. It may be combined with one additional Breast Imaging Review Station (MW0200)                                          MWO300 includes:      -SECTRA Clincal Edition PACS package and software license          -SECTRA File System Archive Software                          -DICOM Modality Worklist Service Software                    -IDS5/MX Breast Imaging Workstation Software                     -Dell Precision 670 Workstation with keyboard and mouse               -3GB DDR memory                           -292 GB Fast SCSI Disk Storage                           -3,5 in., 1.44 MB Floppy                          -CD-R/RW Drive                          -Gigabit Ethernet Interface Card                          -Samsung 19" Color Flat Panel Display                           -Display card with Direct X Drivers                          -Sectra Workflow-Plus Keypad                          -Screen Calibrator Unit                                                         Image Server XD DICOM Storage Service MW0305: -Automates transmission of user created annotations and reports to PACS.                               - There are two 5 Megapixel Flat monitor