This Auction Is Closed
MAHONEY 100CY Laser Measurement
Reserve not met; Bid Now, Click Here
This item will not be sold if the Reserve price is not met.
|Mar 30 - 03:00am EDT|
This is a Seller Self-Managed Auction, and all questions will go directly to the Seller. Payment arrangements must be made with the Seller when the auction closes. You can learn more about Self-Managed Auctions here.
To measure CO2 or YAG lasers.
This sale is for one new: Mahoney 100 Watt CO2 Laser Power Measurement Probe. Comes with instructions and original packaging.
Measures laser power for YAG (900-1250 nm) and CO2 (8-11 microns). Laser measurement range from 0 to 100 watts. This probe is tested and fully operational.
Laser power measurements are quick and easy with the 100 watt power probe. Position the power meter in front of the laser beam (as shown in the photo) and 28 seconds later read the power measurement. It does not involve a time consuming setup and alignment like other power meters. Unfortunately, most laser power meters have sacrificed ease of use to gain continuous power readings. However, in most laboratory and production situations, the usual requirement is for a quick spot-check of power with a minimum of disruption.
This power probe is a calorimeter type power meter which measures laser power using a timed exposure. It will display the average power absorbed on the calibrated readout scale and can be used with continuous or repetitively pulsed lasers.
Key Features of this probe are:
The absorbing probe head is conveniently sized. The head is large enough to be easily used, yet small enough to be inserted between optical components to measure the laser power without disturbing set-up.
The hand-held meter requires only about one minute to make a laser power measurement
The absorbent coating is very tough, resisting mechanical abrasion and water immersion
A zero adjustment mechanism has been incorporated into the design to expedite and simplify the power measurement process
An accurate and durable all metal construction has been used to ensure a long life
The 100 watt power probe is a self-contained unit consisting of an absorbing head, a temperature measuring mechanism, a zeroing screw/nut and a readout dial. In operation, the dial is zeroed. Then, the absorbing head on the end of the power probe is exposed to the laser beam for 28 seconds.
After the laser probe is removed from the laser beam, the average power can be read out on the dial. If it is necessary to make several power measurements in succession, the absorbing head can be rapidly cooled by immersing into a bucket of water between measurements.
The 100 watt laser probe has a coating that works for the wavelength range of 0.2 to 11 microns.
Laser Powers Measured : zero to 100 watts
Offered with a warranty for one year manufacturer defects.
|This item will not be sold if the Reserve price is not met.
DOTmed's COMPLIANCE NOTICE AND COMPLIANCE COMPLAINT PROCEDURE.