Over 200 Total Lots Up For Auction at Two Locations - MA 07/22, TX 07/29

Spanish SpanishFrench FrenchPortuguese Portuguese

You must be a DOTmed registered user to watch this auction, but there's good news:

Become a registered DOTmed user for FREE by using the link below, or log into your existing DOTmed account. Registration takes just minutes and gives you these benefits:

Sign up here, it takes just minutes and is completely free.

Register

Registration is Free and Easy.

Enjoy the benefits of The World's Leading New & Used Medical Equipment Marketplace.

Register Now!
 
spacer
GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor
GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor GE Dash 4000 Monitor
View All Meena Medical Retirement Sale Surplus Equipment Auctions

GE Dash 4000 Monitor

  • Starting Bid USD $10.00

  • This item will not be sold if the Reserve price is not met.
  • Time Left
  • Bid Closes Jul 29 - 4:14pm EDT
  • Auction # 269566
Lot #4612181
Bid on this auction
View the Terms and Conditions
Hosting Fee
Winning Bid Fee
USD $1.00 and up 18.00%
  • Location: TX, USA
  • MFG: GE
  • Model: Dash 4000
  • Type: Monitor
GE Dash 4000 Patient Monitor with 3 Lead ECG, SpO2, NIBP capability, CO2, and Printer - Pre-Owned in Very Good Condition

VENDOR DESCRIPTION
With the Dash 4000 monitor from GE Healthcare, you can adapt to each patient’s monitoring needs in virtually every high-acuity situation. Versatile, modular and portable, Dash monitors address Clinical Information Logistics* by helping enable you to put the right monitoring solution in the right place at the right time. Dash monitors provide excellent clinical intelligence—when you need it—to help you make informed care decisions.

FEATURES
- ECG, Nellcor technology, Non-Invasive Blood Pressure (NIBP), SpO2, Temperature, CO2, and printer.

Front of Monitor
- Alarm Light Indicator: Provides a visual alarm for patient status alarms.
- Control Panel: Provides quick function keys and the Trim Knob control to navigate menus and select options.

Right of Monitor
- Patient Connectors: Allows patient cables to connect to the monitor.
- Enabled Option Labels: Identifies the options enabled on the monitor.

Left of Monitor
- Built-in writer: Prints on two inch wide paper.
- Battery doors: Holds up to two batteries to provide power during patient transport or whenever AC power is interrupted.

Back of Monitor
- Line voltage selector: Matches the line voltage and frequency rating for your country.
- Product code label: Identifies the product code for this monitor for identification and service needs.
- Equipotential stud: Provides a common reference to an auxiliary device via a ground wire attached to the stud.
- DC power connector: Provides connection for DC power cable. The internal power supply converts the AC current to DC power. The monitor is preset at the factory for a specific AC voltage.
- Wireless transmitter label: Identifies monitors that contain an internal wireless transmitter for network communication.
- Ethernet connector: Provides network connections to other monitors and devices used in the patient monitoring network.
- Aux connector: Provides serial connection to compatible auxiliary devices, including: Remote control, TRAM-RAC housing, Remote display, Nellcor® 395 pulse oximeter, Aspect® BISx module.
- Defib Sync connector: Provides analog output signals to other equipment.
- Voltage and current requirements: Identifies the voltage and electrical current requirements for proper and safe operation of this monitor.
- Speaker: Provides an audible announcement of patient and system status alarms.

Main Display
- Time, date and factory or custom default name
- Care unit and bed name
- Patient name
- Parameter windows
- Parameter waveforms
- MORE MENUS
- Large Clock/Date
- Message line
- Battery gauge

Parameter Window
- Digital values
- Parameter window label
- Alarm limits
- Units of measurement

Alarms
- Alarm pause: Lasts no more than three minutes.
- Alarm volume: Can be turned off, lowest setting is 10 percent.
- Discharge alarms: The monitor alarms every three minutes.
- Alarm levels: Automatically increased to patient status advisory.

SPECIFICATIONS
- Temperature Range: 32 to 113 °F (0 to 45 °C).

Default Unique Alarms
- NBP-S, NBP-D, NBP-M (ADULT-ICU and OPERATING ROOM): 350 to -25.
- NBP-S, NBP-D, NBP-M (NEONATAL-ICU): 150 to -25.
- ART: 300 to 30.
- HR: 300 to 30.
- SPO2: 105 to 60.
- SPO2-R: 235 to 40.
- TEMP: 450 to 0.

Parameters
- ECG gain: Derived by mV (.25 mV to 2 mV) and displayed on the primary ECG waveform.
- Units of measurement: Metric only.
- Arrhythmia level: The default arrhythmia alarm level for ADULT-ICU is FULL; NEONATAL-ICU and OPERATING ROOM are OFF.
- Heart rate: Values under 30 bpm are not displayed. The values displayed in the parameter window are replaced with "X”.
- SpO2 saturation: Values under 60 percent are not displayed. The values displayed in the parameter window are replaced with "X”.

Printed Output
- Type (alarm, manual or saved), Alarm violation (if any), Unit name, bed number and patient name, Date and time, Patient-monitor type, Alarm volume, Speed.
- Lead failed (if any), Heart rate, Arrhythmia call (if any)
Pace mode (if on), Arrhythmia mode (full, lethal, off), PVC count (if arrhythmia mode is on), ST value for top displayed lead (if on), ECG filter (Hz range), Monitored parameter values.

CONTENTS
Qty 1 - GE Dash 4000 Patient Monitor
Qty 1 - GE Dash Capnoflex LF CO2 Module
Qty 1 - NIBP Hose & Cuff
Qty 1 - ECG Cable and Leads
Qty 1 - Power Cord

CONDITION
Cosmetic - Very Good
Working - Excellent

Please contact us for any more information
Information

Buyers Premium: 18% with 3% cash discount

Inspection
Inspection is welcome. Please click email seller or contact mme@meenamedical.com or 817-283-1640.

Address:
Meena Medical Equipment Inc.
1905 Bedford Road
Suite 100
Bedford, TX 76021

WARNING TO ALL BIDDERS. DESPITE WHAT MAY BE WRITTEN IN THIS AUCTION, DOTMED RECOMMENDS THAT BIDDERS ASSUME THAT THE CONDITION OF THIS EQUIPMENT IS UNKNOWN. DOTMED ENCOURAGES YOU TO INSPECT EQUIPMENT BEFORE YOU BID. ALL ITEMS ARE SOLD 'AS IS' & 'WHERE IS' AND UNLESS THE SELLER HAS INDICATED OTHERWISE, THERE WILL BE NO REFUND

Inspection:

Inspection is welcome. Please click email seller or contact mme@meenamedical.com or 817-283-1640.

Terms:

No property removed until fully paid. All equipment is sold as is and where is. The information contained in this listing is subject to inspection and verification by all parties relying on it. No liability for its accuracy, errors, or omissions is assumed by the seller, the representative of the seller, Meena Medical Equipment Inc. or their agents.

All property is sold 'AS IS', and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determinative factor. Meena Medical Equipment Inc. may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Meena Medical Equipment Inc. be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determinative factor. Meena Medical Equipment Inc. shall endeavor to describe in detail each item and any pertinent information about it.

Meena Medical Equipment Inc. will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

The Bidder agrees that the seller, any representatives of the seller, Meena Medical Equipment Inc. or their agents shall not be held responsible or liable:

* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;

* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.

The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authorities in the jurisdiction in which the item is to be used.

Shipping/Pickup:

Seller will provide a packing and shipping quote for all buyers. Buyer's can also do their own packing and shipping. Items must be removed in 10 days or storage fees may be applied.

There will be a nominal Auction Hosting Fee added to the amount due if you are the Successful Bidder. This fee will be paid directly to DOTmed.com and not to the Seller of this Auction. See the Hosting Fee schedule in the table below.
Hosting Fee
Winning Bid Fee
USD $1.00 and up 18.00%

Warranty:

AS IS WHERE IS
There have been no questions regarding this auction yet. Ask a question.
There may be additional information with respect to this auction, please click the following links for more information
Condition Terms & Conditions

If you plan to bid...

You must become AN APPROVED BIDDER before you can bid on this auction. To become an APPROVED BIDDER you can either become DOTmed Certified, provide a credit card or apply for pre-approval. Click here to learn more about becoming a pre-approved bidder.

If you are not a Pre-Approved bidder, you will be asked for your credit card information when you click "Enter Bid".

Your credit card will not be charged if you are the Successful Bidder for this Auction and complete the transaction. In the event that you are the Successful Bidder and fail to complete the purchase/sale transaction and you supplied a credit card as part of the Approved Bidder process, your credit card will be charged by DOTmed the amount of your bid or $2,000, whichever is less, as an administrative fee. Similarly, if you are the Pre-Approved Successful Bidder and fail to complete the purchase/sale transaction, your Pre-Approval shall be revoked and DOTmed shall invoice the amount that otherwise would have been charged if a credit card had been provided and such invoice is payable upon receipt. The referenced administrative fee is, in each instance, in addition to any additional rights or remedies that the Seller or DOTmed may have.

For bidders who have not previously purchased via DOTmed Auction: DOTmed may place a $200 hold on your credit card as part of our Approved Bidding process. You will not be charged if you are not the Successful Bidder for any items and the authorization will be released at the end of the auction event. Please check with your financial institution for confirmation of available funds/credit. In some cases, releases may take a longer period of time depending on your bank's processing time.

The Successful Bidder agrees to sign the DOTmed Confirmation of Purchase. Click here to view a sample copy and read the terms and conditions of sale.