The Physio-Control LIFEPAK Express Defibrillator (#80427-000134) is a first response defibrillator when responding to an SCA (Sudden Cardiac Arrest) patient. This Express Defibrillator is designed for any first responder to use, whether its a bystander or a coworker, and no emergency training is required.
Warranty: 5 Years.
The Physio-Control LIFEPAK Express Defibrillator is a simplified defibrillator that can be operated by any untrained responder in a cardiac emergency. This device is equipped with both visual cues and voice prompts that guide the user through each step of defibrillation. It's a low-profile, simple design that won't cause any confusion as well as being light and compact.
The initial shock to a patient is set at 200 joules, with the ability to increase to 360 joules if needed for patients who need more intense defibrillation. The device is also equipped with a readiness indicator so users know when this device is prepared for use or needs to be replaced.
FeaturesPhysio-Control LIFEPAK Express Defibrillator Features
- Simplified for use by untrained responders, such as co-workers or bystanders.
- Includes electrodes and has a readiness indicator.
- Capable of providing shocks measuring 20 joules to 360 joules.
SpecificationsPhysio-Control LIFEPAK Express Defibrillator Specifications
- Height: 4.2 in (10.7 cm).
- Width: 8 in (20.3 cm).
- Depth: 9.5 in (24.1 cm), excluding handle.
- Weight: 4.5 lb (2 kg) with CHARGE-PAK battery charger and electrodes.
- Waveform: Biphasic truncated exponential, with voltage and current duration compensation for patient impedance.
- Output Energy Sequence: Multiple levels, configurable from 150 joules to 360 joules. Factory default settings of 200J, 300J, 360J.
- Output Energy Accuracy: ±10% into 50 ohms, ±15% into 25 to 100 ohms.
- Shock Advisory System: An ECG analysis system that advises whether a shock is appropriate; meets rhythm recognition criteria specified in DF39. The device charges for shock only when the Shock Advisory System advises defibrillation.
- Device Capacity: Twenty (20) full discharges or 140 minutes of “on time” with a fully charged device.
- Shock Charge Time: Charge times with a fully charged device: 200 joules in less than 9 seconds, 360 joules in less than 15 seconds.
- System Recharge Times: Recharge times with a fully discharged device: able to deliver 6 shocks or provide 42 minutes of operating time after 24 hours of recharge time and 20 shocks or 140 minutes of operating time after 72 hours of recharge time with a new CHARGE-PAK battery charger at temperatures above 15°C (59°F).
- Controls: Lid Release/ON-OFF - Controls device power. Shock button delivers defibrillation energy.
- Electrical Protection: Input protected against high voltage defibrillator pulses per IEC60601-1/EN60601-1
- Safety Classification: Internally powered equipment.IEC60601-1/EN60601-1.
- User Interface: The user interface includes voice prompts, audible tones and graphic prompts.
- Readiness Display: The readiness display shows the device status.
- OK Indicator: Shows “OK” when the last self-test was completed successfully. When the “OK” indicator is visible, all other indicators are not visible. The “OK” indicator is not displayed during device operation.
- CHARGE-PAK Indicator: When displayed, replace the CHARGE-PAK™ battery charger.
- Attention Indicator: When first displayed, at least six (6) discharges or 42 minutes of operating time remain.
- Service Indicator: Service required when displayed.
- Operating Temperature: +32° to +122°F (0° to +50°C).
- Storage Temperature: -40° to +158°F (-40° to +70°C) with CHARGE-PAK battery charger and electrodes, maximum exposure time limited to one week.
- Atmospheric Pressure: 760 mmHg to 429 mmHg, 0 to 15,000 feet above sea level.
- Relative Humidity: 5 to 95% (non-condensing).
- Water Resistance: IEC60529/EN60529 IPX4 “Splash proof” with electrodes connected, CHARGE-PAK battery charger installed.
- Shock: MIL-STD-810E, Method 516.4, Procedure 1, (40 g, 6-9 ms pulse, 1/2 sine each axis).
- Vibration: MIL-STD-810E, Method 514.4, Helicopter - category 6 (3.75 Grms) and Ground Mobile - category 8 (2.85 Grms).
- Energy Sequence: Energy sequence is set to 200J, 300J, 360J.
- Motion Detection: The motion detection system is set to on during analysis.
- Energy Protocol: The energy protocol is set to increase energy only after a lower energy shock was unsuccessful.
- Stack Shocks: Stack shocks option is set to off.
- Turn-On Prompt: The turn-on prompt is set to provide voice prompts upon power on.
- CPR Time: The CPR Time is set to 120 seconds.
- Voice Prompt Volume: The voice prompt volume is set to high.
- Memory Type: Internal digital memory.
- ECG Storage: Dual patient data storage. Minimum 20 minutes of ECG stored for the current patient, summarized data stored for the previous patient.
- Report Types:
- Continuous ECG – A continuous patient ECG report.
- Continuous Summary report – A summary of critical resuscitation events and ECG waveform segments associated with these events.
- Event Log report – A report of time stamped markers, which reflect operator and device activity.
- Test Log report – A device self-test activity report.
- Capacity: Minimum 200 time-stamped event log markers.
- Communications: Wireless transfer to a personal computer.
- Data Review: Physio-Control provides an array of tools to meet customer needs for data viewing and analysis.
LiteraturePhysio-Control LIFEPAK Express Defibrillator Literature
Stryker LIFEPAK Express Defibrillator Data Sheet
Physio-Control LIFEPAK CR Plus / LIFEPAK EXPRESS Defibrillator Operating Instructions
Physio-Control LIFEPAK CR Plus / LIFEPAK EXPRESS Defibrillators Accessories Brochure
Item Name: Defibrillator