About This Item
Reconditioned part from fully tested machine, inspected thoroughly. Only what is shown is included. Guaranteed functional and guaranteed for 30 days
Know What You are Buying
We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience
DESCRIPTION
Manufacturer - Medivators
Part # 50098-SPB
SKU: 115530
TESTED Parts – these parts were all tested and confirmed functional to the extent possible in all modes in our professional shop before parts harvest. Medivators Advantage Plus with one of the following 5 serial numbers – 74534342 , 74888242 , 74888241 , 75108943 , 74808240 all mfg in 2014 and under full medivators maintenance when removed from service in 03/24
Description – Dispenses RAPICIDE® PA High Level Disinfectant for MRC testing at the end of each cycle. These are labeled Right and Left, but they are identical. Poppet valve lifts and moves sideways to dispense sample. Mounts to SS Panel via hose connector (included)
Other Numbers - 41600217
These parts are from a group of machines used lightly in a university setting. Cantel / Steris / Medivators does not provide actual part numbers in some cases, but we provide as much descriptive support as possible to ensure you are buying the correct replacement part. We have overall pictures of these machines as well as individual parts pictured to further support this goal
Return Policy
5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender.
If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item.
NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.