If you need installation assistance, please call for free support!
RPI Part #SCK037
OEM Part #01-108152S (kit) & 01-106637S (Water Filter)
DRAIN KIT WITH PUMP FILTER
See Notes below for The RPI Advantage
PM Service Tip The OEM recommends replacing the filter every 6 months or every 500 cycles (wichever comes first).
Also available: Drain Tube Assembly (RPI Part #RPK432)
Fits: From the Reservoir to the Pump Filter to the Pump to the Drain Line
Model(s) This Part Fits: Statim 2000
Notes: To upgrade the Scican Statim 5000, order the Drain Tubing Kit (RPI Part #RPK432) and the Female Quick Disconnect Fitting (RPI Part #RPF428). The Statim 5000 comes equiped with the drain Line and Plug.
The RPI Advantage The need for Pump Filter replacement is easily detected with RPIs Clear Tubing and Filter. Draining is simplified with the addition of our Quick Disconnect System Just Attach the tubing and you are ready to drain.
Includes:
Cord Clip (RPI Part #ADC058)Barb Tee (RPI Part #RPB703)
Cable Clamp (RPI Part #RPC701)
Cable Holder (RPI Part #RPC702)
Cable Tie (3 pieces) (RPI Part #RPT083)
Drain Tubing Kit (RPI Part #RPK432)
Female Quick Disconnect Fitting (RPI Part #RPF428)
Hex Nut (RPI Part #RPH111)
Silicone Tubing (RPI Part #RPT373)
Water Filter (In-Line) (RPI Part #SCF034)