Hello. Does any body can share Agfa´s drystar 5503 service manual to me? Or help me to find a part number? I appreciatte your help in advance. hevem@yahoo.com
there is a sprocket located in the shaft of the motor that make the exit roller assembly (the one that makes the entire roller assembly deliver the films in the sorter). can you share this part number or if you can, the service manual?
Thank you a lot.
Hello
After inserting a new pack of films, printer DryStar 5503 Agfa printer shows an error:
HC 11316 up. tray film inv .: Dmax limited.
I think it is damaged RFID transmitter. How can I get around?
Can someone help me or send a service manual?
Regards
Roman
One of two things, did you guys update the rf tag reader in the digitizer and update the software?
two, did you do an mdm calibration?
If you didn't update the rf tag reader in all of the drawers do so immediately. AGFA at one time was offering the tag readers at no charge. You must contact AGFA global support with the serial number of your drystar.
After you update the tag readers you must perform and MDM calibration.
One of two things, did you guys update the rf tag reader in the digitizer and update the software?
two, did you do an mdm calibration?
If you didn't update the rf tag reader in all of the drawers do so immediately. AGFA at one time was offering the tag readers at no charge. You must contact AGFA global support with the serial number of your drystar.
After you update the tag readers you must perform and MDM calibration.
(9)
HECTOR VELAZQUEZ
AGFA DRYSTAR 5503 PRINTER
April 15, 2012 09:08
Hello. Does any body can share Agfa´s drystar 5503 service manual to me? Or help me to find a part number? I appreciatte your help in advance. hevem@yahoo.com
to rate and post a comment
(8)
Barry Walgamotte
Re: AGFA DRYSTAR 5503 PRINTER
April 16, 2012 07:03
What part number do u need
to rate and post a comment
(9)
HECTOR VELAZQUEZ
Re: AGFA DRYSTAR 5503 PRINTER
April 16, 2012 10:52
there is a sprocket located in the shaft of the motor that make the exit roller assembly (the one that makes the entire roller assembly deliver the films in the sorter). can you share this part number or if you can, the service manual?
Thank you a lot.
to rate and post a comment
(8)
Barry Walgamotte
Re: AGFA DRYSTAR 5503 PRINTER
April 17, 2012 07:19
What is your email?
to rate and post a comment
idress radman
re: Re: AGFA DRYSTAR 5503 PRINTER
May 29, 2013 12:47
idressradman@gmail.com
to rate and post a comment
(2)
Dang Thanh
re: Re: AGFA DRYSTAR 5503 PRINTER
December 12, 2014 08:28
dangthanh56@yahoo.com. Please share me service manual and sofware for 5503 printer AGFA. Thanks
to rate and post a comment
Boulerbag Laredj
re: re: Re: AGFA DRYSTAR 5503 PRINTER
May 12, 2015 03:04
mbeph08@yahoo.frPlease share me service manual and sofware for 5503 printer AGFA. Thanks
to rate and post a comment
(3)
Ozen Huseyin
re: Re: AGFA DRYSTAR 5503 PRINTER
November 18, 2015 07:44
do you have a agfa drystar 5503
thank you so much for your help
pleace can you send me
thanks
huseyinozen@gmail.com
to rate and post a comment
Sharston Cozin
re: Re: AGFA DRYSTAR 5503 PRINTER
September 26, 2018 09:59
do you send me too. please!!! sharston@gmx.com
to rate and post a comment
CRAIG WAMBURA
Re: AGFA DRYSTAR 5503 PRINTER
April 21, 2012 09:56
I have the service manuals.
Whats your email?
to rate and post a comment
(9)
HECTOR VELAZQUEZ
Re: AGFA DRYSTAR 5503 PRINTER
April 21, 2012 10:08
my email hevem@hotmail.com thank you so much for your help
to rate and post a comment
(7)
Kevin Nguyen
re: Re: AGFA DRYSTAR 5503 PRINTER
June 24, 2012 11:59
baonguyen.cmt@gmail.com
Thanks
to rate and post a comment
(2)
(9)
Doron Forshtat
re: Re: AGFA DRYSTAR 5503 PRINTER
April 22, 2013 09:28
The system stays in" installing software" forever
Can you advice how can I get the installation software?
to rate and post a comment
jake staggs
re: Re: AGFA DRYSTAR 5503 PRINTER
May 17, 2013 03:03
my email is jake@jakenmedical.com thank you for your help
to rate and post a comment
(1)
Leandro Neves de Oliveira
re: Re: AGFA DRYSTAR 5503 PRINTER
April 22, 2014 05:51
Hello, I need the service manual for the processor Agfa DRYSTAR 5503, is to send me email. I get the layout if you need a manual that I have.
hug
to rate and post a comment
(1)
Leandro Neves de Oliveira
re: Re: AGFA DRYSTAR 5503 PRINTER
April 22, 2014 05:51
Hello, I need the service manual for the processor Agfa DRYSTAR 5503, is to send me email. I get the layout if you need a manual that I have.
hug
to rate and post a comment
AbouAhmed
re: Re: AGFA DRYSTAR 5503 PRINTER
May 21, 2015 09:02
my email mmbeph08@gmail.com thank you so much for your
to rate and post a comment
EDUARDO GAMES
re: Re: AGFA DRYSTAR 5503 PRINTER
January 29, 2016 08:14
Please, can you send me theses manuals.My email is egamesjaque@gmail.com
Thanks for your help
to rate and post a comment
(11)
Dionisis Avgoustidis
re: Re: AGFA DRYSTAR 5503 PRINTER
January 19, 2017 06:10
Please share me service manual for 5503 printer AGFA. Thanks
to rate and post a comment
(6)
moncef dergali
re: Re: AGFA DRYSTAR 5503 PRINTER
February 09, 2017 08:44
Please share me service manual and sofware for 5503 printer AGFA. Thanks
moncef_dergali@hotmail.fr
to rate and post a comment
Greg Hackworth
re: Re: AGFA DRYSTAR 5503 PRINTER
March 15, 2017 10:26
Will you please send me a copy of the AGFA DryStar 5503 service manual. gregory.hackworth@baycare.org
to rate and post a comment
(3)
Joao Carlso
re: Re: AGFA DRYSTAR 5503 PRINTER
February 21, 2018 09:38
Dear Craig Wambura:
Please, can you send me theses manuals.
My email is engmed.sm@gmail.com
Thanks for your help
to rate and post a comment
gajhendran gajhen
re: AGFA DRYSTAR 5503 PRINTER
June 22, 2013 10:27
hi there,can anyone please knidly sent me the Agfa drystar 5503 service manual to me?thank you.
to rate and post a comment
Boulerbag Laredj
re: AGFA DRYSTAR 5503 PRINTER
May 12, 2015 03:05
Please share me service manual and sofware for 5503 printer AGFA. Thanks
to rate and post a comment
Jaime Lonosa
re: AGFA DRYSTAR 5503 PRINTER
August 25, 2015 08:39
Hi I need Agfa drystar 5503 printer service manual, Can anybody share. Thanks
to rate and post a comment
(14)
romanz
re: AGFA DRYSTAR 5503 PRINTER
July 22, 2016 10:43
Hello
After inserting a new pack of films, printer DryStar 5503 Agfa printer shows an error:
HC 11316 up. tray film inv .: Dmax limited.
I think it is damaged RFID transmitter. How can I get around?
Can someone help me or send a service manual?
Regards
Roman
to rate and post a comment
Benjamin Banks
re: re: AGFA DRYSTAR 5503 PRINTER
May 25, 2018 09:51
Did you get an answer for this? I am in need of a work around also, please.
to rate and post a comment
(36)
(1)
Ronald Swapp
re: re: re: AGFA DRYSTAR 5503 PRINTER
May 29, 2018 10:08
One of two things, did you guys update the rf tag reader in the digitizer and update the software?
two, did you do an mdm calibration?
If you didn't update the rf tag reader in all of the drawers do so immediately. AGFA at one time was offering the tag readers at no charge. You must contact AGFA global support with the serial number of your drystar.
After you update the tag readers you must perform and MDM calibration.
to rate and post a comment
(36)
(1)
Ronald Swapp
re: re: AGFA DRYSTAR 5503 PRINTER
May 29, 2018 10:08
One of two things, did you guys update the rf tag reader in the digitizer and update the software?
two, did you do an mdm calibration?
If you didn't update the rf tag reader in all of the drawers do so immediately. AGFA at one time was offering the tag readers at no charge. You must contact AGFA global support with the serial number of your drystar.
After you update the tag readers you must perform and MDM calibration.
to rate and post a comment