Analogic An8102 Rf Ampilfier - Service Technicians Forum
advertisement
Current Location:
>
>
> analogic an8102 rf ampilfier

analogic an8102 rf ampilfier

(6)
(1)

HYUNSUP KIM

analogic an8102 rf ampilfier

December 22, 2011 02:02

Anyone have the service manual/schematic for the Analogic AN8102 amplifier?I have a unit that has problem with high DC power error(no DC power at the start. Disconnected power lines from amp section, and still no high DC voltage (should be around 150VDC, I think)

Log inor Register

to rate and post a comment

(55)
(18)

Mikhail Zakurdaew

Re: analogic an8102 rf ampilfier

December 23, 2011 09:43

Good day!
Check the MOS-FET transistor and circuitry in the power supply for the preamp. Diagrams and service manual I have.
Good luck!

Log inor Register

to rate and post a comment

(6)
(1)

HYUNSUP KIM

Re: analogic an8102 rf ampilfier

December 26, 2011 10:13

Hi, let me know how I can contact you. I was able to force the high voltage to come up by enabling a pin, so I know the actual voltage section is fine. Replaced the microprocessor for possible corrupt firmware to no avail. RF pre/amp section seemed to be ok. Something is holding the high voltage down. Thanks

Log inor Register

to rate and post a comment

(1)

RAUL BIANCULLI

Re: analogic an8102 rf ampilfier

December 27, 2011 05:08

I am interested to get the AN8102 service manual.
raul_bianculli@netgate.com.uy

Log inor Register

to rate and post a comment

majid yousefi

re: Re: analogic an8102 rf ampilfier

June 29, 2015 04:24

I need this too. I appreciate if you send it to me. parsimard@gmail.com
thanks

Log inor Register

to rate and post a comment

(32)

(6)

Eugene Telles

Re: analogic an8102 rf ampilfier

February 08, 2012 11:35

Hello,
I am interested in getting the manual and diagrams. Please call me at 719-393-7373
Thanks. Gene

Log inor Register

to rate and post a comment

(2)

Steve Kim

re: Re: analogic an8102 rf ampilfier

December 05, 2013 12:38

How do I contact you to get Analogic 8102/8103 rf amp manual and schmatic diagrams? Please advise me.

Regards,
Steve.

Log inor Register

to rate and post a comment

(10)
(1)

David Doucet

re: Re: analogic an8102 rf ampilfier

December 10, 2013 01:17

Would it be possible to get a copy of the service manuals and schematics also? dave.doucet@dynamicimagingservice.com

Log inor Register

to rate and post a comment

(4)

(1)

Jorge Balbiano

re: Re: analogic an8102 rf ampilfier

December 13, 2013 04:17

I'm also need service manual and schematics. Please contact me jorge_balbiano@yahoo.com

Log inor Register

to rate and post a comment

egor dementev

re: Re: analogic an8102 rf ampilfier

January 26, 2015 08:09

there burned transistors on them number 21-514021 21-514020 and I can not find such than they can be replaced?

Log inor Register

to rate and post a comment

majid yousefi

re: Re: analogic an8102 rf ampilfier

June 29, 2015 04:24

I appreciate if you send it to me.
parsimard@gmail.com
thanks

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: re: Re: analogic an8102 rf ampilfier

August 02, 2017 08:05

We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

(16)
(4)

Mike Manning

re: Re: analogic an8102 rf ampilfier

August 05, 2015 10:45

Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and send them to me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: re: Re: analogic an8102 rf ampilfier

August 02, 2017 08:05

We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

(16)
(4)

Mike Manning

re: Re: analogic an8102 rf ampilfier

August 02, 2017 03:23

Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and share them with me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927

Log inor Register

to rate and post a comment

(44)
(1)

chalie alvarez

re: Re: analogic an8102 rf ampilfier

July 18, 2019 09:10

can I have a copy of the service manual and schematics please

Log inor Register

to rate and post a comment

(20)
(1)

Mauro Neves

re: Re: analogic an8102 rf ampilfier

July 19, 2019 10:26

Hi Mikhail!

Can I have the service manual of AN8102 from you?
My e-mail is mauro.neves@hotmail.com.

Thank you

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: analogic an8102 rf ampilfier

August 02, 2017 08:05

The Anagogic RFPA is a uP based system, any inner fault will result into FAULT status. You need to solve the fault(s) and possibly need to re-calibrate the system via necessary procedure by software. I don't think you can fix the fault simply replacing a component. We have the necessary facilities and skills. frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

MEDREPAIR- BEST CHOICE FOR SURGICAL POWER SALES AND SERVICE 1-800-717-1894

Check out our large inventory of Electric and Pneumatic Power Equipment, Attachments and accessories from Stryker, Hall and more. We also offer free estimates on reliable repairs and warranties.

 

advertisement

 

advertisement

 

advertisement

 

advertisement
advertisement