Analogic An8102 Rf Amplifier - Service Technicians Forum
advertisement
Current Location:
>
>
>
> Analogic AN8102 RF Amplifier

Analogic AN8102 RF Amplifier

Tags: MRI

(1)

Charles777

Analogic AN8102 RF Amplifier

October 10, 2014 10:32

Is there anyone who can help me? I need to know how to make the communication cable from Factory Interface Control Connector of the amplifier to PC.
Thanks for your attention.

Log inor Register

to rate and post a comment

(86)
(25)
(1)

Konstantin Kuznetsov

re: Analogic AN8102 RF Amplifier

October 11, 2014 02:05

Factory Interface Control Connector (RS-232 Comm Signals)
pin 6 - TXD - Xmit data from Amplifier.
pin 7 - RXD - Rcvd data from Host system.
pin 15 - GND

Log inor Register

to rate and post a comment

(16)
(4)

Mike Manning

re: re: Analogic AN8102 RF Amplifier

July 20, 2015 03:39

Hi Konstantin, I too am trying to setup communication with the 8103. I want to test the amp outside of the MRI system. I have very little documentation. I'm going to try to communicate to the amp thru a hyperterminal type connection. Do you have any experience with this, is this possible, are there any stand alone apps to comm to the amp from a laptop? If you can kindly share any information and advice you have it would be very much appreciated.
Thanks,

Mike Manning
manning-michael2@aramark.com

Log inor Register

to rate and post a comment

(20)
(1)

Mauro Neves

re: re: Analogic AN8102 RF Amplifier

July 19, 2019 10:26

Hi Konstantin!

The AN8102 Customer Interface is RS232 or RS422 interface?

Thank you.

Log inor Register

to rate and post a comment

(7)
(3)

PANAGIOTIS KAROLEMEAS

re: Analogic AN8102 RF Amplifier

October 11, 2014 02:10

Contact me via email at "panagiotis.karolemeas@gmail.com"

Log inor Register

to rate and post a comment

egor dementev

re: Analogic AN8102 RF Amplifier

January 26, 2015 08:09

i also need servise manual can you give me please?, there burned transistors on them number 21-514021 21-514020 and I can not find such than they can be replaced?

Log inor Register

to rate and post a comment

ProCare - Let us keep your MRI system up and Running with Confidence!

ProCare ensures that the medical equipment you rely upon performs at an optimum level! Our engineers take pride in fast response time leading to less down time! Let us keep you Running With Confidence! Call 855.367.4330 to speak direct with an engineer.

 

advertisement

 

advertisement

 

advertisement

 

advertisement
advertisement