SEARCH
Current Location:
>
>
>
> ct Toshiba aquilion 64

ct Toshiba aquilion 64

Tags: CT

(13)
(2)

Sergei Nikitin

ct Toshiba aquilion 64

May 15, 2018 09:53

hello everybodies!
I changed all five the same hdd's at one of four rdd. configuring rdd doesn't work.
it wrote on cmd utility (. /RDDUtil.exe) Error checking min/max ED'S table against disk sizes in RDD.

I checked file RDDSize. txt and there include the next prompt
0x04385280 0xffffffff
old disks is seagate st3300653fc 279 gb
new disks are the same by shield on body but the system identify it as seagate DKS2G-K300FC 277 gb.

if anybody wants to help me, I have some photos at this problem.
my e-mail: shtopor63@mail.ru

Log inor Register

to rate and post a comment

(16)
(3)

Tolga GULUMSER

re: ct Toshiba aquilion 64

May 16, 2018 09:18

Privet Sergei. At the manual also says and I experienced also, you should change all five hdd at the same time at RTM even only one of them is defective. And after no need to make rddutil, you have to make all together at admin menu; configure, re-build....so on. And one more thing if the old hdd is chetea 15.5k and the new 5 should 15.5k. Good luck.

Log inor Register

to rate and post a comment

(82)
(14)

Uldis Verdins

re: ct Toshiba aquilion 64

May 16, 2018 09:18

Hi Sergei!
I think RDD not accept this new HDD becose all original HDD hawe modifed FW and cost much more like regular. This is a reason way RDD not work as You will.
What is exactly model of new FC HDD?
What problem was with old FC Seagate?
Vsego nailuchshego,
Uldis

Log inor Register

to rate and post a comment

(13)
(2)

Sergei Nikitin

re: re: ct Toshiba aquilion 64

May 16, 2018 04:05

Hi!
new hdd's the same (as sticker), but on system wrote seagate DKS2G-K300FC.
old two hdd's broken sectors.

Log inor Register

to rate and post a comment

(16)
(3)

Tolga GULUMSER

re: re: re: ct Toshiba aquilion 64

May 16, 2018 10:57

If you read and understood my comment, it will solve your problem. Otherwise don’t spend your time for unusefull things.

Log inor Register

to rate and post a comment

(82)
(14)

Uldis Verdins

re: re: re: ct Toshiba aquilion 64

May 17, 2018 09:16

Raid SYstem read drive full passport and as I told all drive`s have modificed Passport and FW to prevent using other drives.
You can tray to take out HDD with BAD sector and format with Seagate tools or You can tray to repair defective sector with HDDREG program (DOS) on PC with SAS FC card. If You`l have good result, put it back to RDD and rebuild as told mr. Tolga.
If You have more problem HDD`s to do this again with next drive.
If You will I can repair You drive`s with PC3000 tool. For this You must sent Drive`s to my and after work I sent it back.
Good lock

Log inor Register

to rate and post a comment

(13)
(2)

Sergei Nikitin

re: re: re: re: ct Toshiba aquilion 64

May 22, 2018 10:06

Can you rebild firmware of my new hdd's?

Log inor Register

to rate and post a comment

(13)
(2)

Sergei Nikitin

re: re: re: re: ct Toshiba aquilion 64

May 23, 2018 10:05

Hi! Can you change firmware if I send new HDD's to you?

Log inor Register

to rate and post a comment

(279)
(52)
(2)

juan pablo amado

re: ct Toshiba aquilion 64

May 24, 2018 10:04

Normally hdd is formatted in 512 bytes / sector; but This array uses 524 bytes/sector ; you need to modify MBR in partition table

Log inor Register

to rate and post a comment

OiHealthcare - ISO 9001 & 13485 Certified - Call 1-888-278-9933

Oxford Instruments Healthcare, is a leading ISO 9001 & 13485-certified organization, that specializes in providing quality refurbished CT & MRI systems, service, mobile units & parts at prices you can afford. Call 888-278-9933 Email DOTmedinfo@oxinst.com

 

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2018 DOTmed.com, Inc.
ALL RIGHTS RESERVED