Echopac To Nas Issue - Service Technicians Forum

Echopac to NAS issue

Tags: Cardiac Imaging

(14)
(1)

tom calderon

Echopac to NAS issue

March 19, 2020 10:42

Hello everyone,
We are having a problem with our echopac to WD NAS. The IP was changed when power went down according to the DR on site and now it doesn't connect to older studies. When I look at the file directories I see the patients listed in the Image folder. I was able to add the IP that is on the NASto echopac and it Pings and verifies but when I try to pull any images before Feb 2nd(today is Mar 18) the hourglass just keeps going. Everything after Feb 2nd comes up. Any suggestions? They send their VIVID S6 images to the Echopac and the images from Echopac to the NAS. Thank you

Log inor Register

to rate and post a comment

(78)
(11)

X_ Root

re: Echopac to NAS issue

March 20, 2020 10:40

Delete the entire queue on your ultrasound scanner and Echopac and try the image transfer.

Log inor Register

to rate and post a comment

(14)
(1)

tom calderon

re: Echopac to NAS issue

March 20, 2020 10:38

Ok problem resolved. I found the NAS was in dhcp mode. Changed it to static, changed the IP on it to the original it had before and everything worked.

Log inor Register

to rate and post a comment

(78)
(11)

X_ Root

re: re: Echopac to NAS issue

March 23, 2020 10:29

Good

Log inor Register

to rate and post a comment

ProCare - Let us keep your MRI system up and Running with Confidence!

ProCare ensures that the medical equipment you rely upon performs at an optimum level! Our engineers take pride in fast response time leading to less down time! Let us keep you Running With Confidence! Call 855.367.4330 to speak direct with an engineer.

advertisement

 

advertisement

 

 

advertisement

 

advertisement