dismiss

Our Clean Sweep Live Auction is coming up fast! Next Tuesday, September 26th at 9:30AM EST

SEARCH
Current Location:
>
>
> error 606 philips iu22

error 606 philips iu22

Tags: Computer Equip, PHILIPS

atena

error 606 philips iu22

October 09, 2015 07:53

Hi,

I have a problem with Philips iU22. Error code is 606. Someone can help me?
Thank.

Log inor Register

to rate and post a comment

(20)
(9)
(61)

Volodymyr Markevych

re: error 606 philips iu22

October 10, 2015 09:56

Error 606 means Host and SIP computers can not communicate. What cart level is your system? possible causes for carts A,B and C: firewire cable, Dolphin IPl cards and cable, Sip motherboard, battery, memory, HDs or software on SIP computer. You may need reinstall software on Host and SIP.

Log inor Register

to rate and post a comment

atena

re: re: error 606 philips iu22

October 11, 2015 09:27

thank you. I tried to do the tests, but I have problems to get into the environment MTE. I have not found the Field Service Manual (453561171961) for instructions.

Log inor Register

to rate and post a comment

(189)
(40)
(3)

EROTOKRITOS SKENTOS

re: error 606 philips iu22

October 10, 2015 09:58

What does the iu22 do?Does it start loads until number 9 in the down left corner and then gives you the message 606?

Log inor Register

to rate and post a comment

atena

re: re: error 606 philips iu22

October 11, 2015 09:26

yes, it does just that...

Log inor Register

to rate and post a comment

(189)
(40)
(3)

EROTOKRITOS SKENTOS

re: re: re: error 606 philips iu22

October 12, 2015 09:21

You have a communication error.You can first check the firewire connection between host and ship i always change the firewire cable because the original does not connect firmly.If that does not work you have problem with hdd.You can try to reload the software but if that does not work you will have to change the hdd,either the two ship or the host.

Log inor Register

to rate and post a comment

pansera angela

re: re: re: re: error 606 philips iu22

October 13, 2015 09:16

Thanks! I have tested the firewire cables, they work! To reload the software, I need the password. How do I obtain it?

Log inor Register

to rate and post a comment

(189)
(40)
(3)

EROTOKRITOS SKENTOS

re: re: re: re: re: error 606 philips iu22

October 14, 2015 07:05

I think you need the usb dongle to do that,but i am not sure.

1 person liked this
Log inor Register

to rate and post a comment

The (#1 Resource) for Medical Imaging and Peripherals. Call 1-949-273-8000

As a Master Distributor for major brands Barco, Philips, and Sony, we offer custom imaging solutions. With our renowned OEM Solutions and Service/Repair Center, Ampronix is a one-stop shop for HD Medical LCD Displays--Printers--Recorders--4K Cameras

 

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2017 DOTmed.com, Inc.
ALL RIGHTS RESERVED