Hello Edgar.
This error indicates a malfunction in X Ray Tube, HV Tank, or Inverter, in this importance order, you have to run diagnostics and then, the replacement of correspondent damaged part.
Regards.
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
(6)
EDGAR SANTIAGO RIVERA ZAMUDIO
error 60-0313 ge brightspeed 16
June 22, 2018 04:24
Hi, everyone..
i have this error when, using 150 mA
60-0313 inverter MAXC IRL cUrrent detected.
This is a hardware detection of maximum current.
How can i fixed?
Regards
to rate and post a comment
(11)
(1)
Maurice Dilick
re: error 60-0313 ge brightspeed 16
June 23, 2018 01:53
Possibilities are Casing spit (tube) Likely due to bubble in Tube Housing, usually noticed first in tilt mode.
Possibility also for the HV Tank, having seen it afew times, or in the KV Control, not a likely.
to rate and post a comment
(4)
Martin Martinez
re: error 60-0313 ge brightspeed 16
June 23, 2018 01:54
Hello Edgar.
This error indicates a malfunction in X Ray Tube, HV Tank, or Inverter, in this importance order, you have to run diagnostics and then, the replacement of correspondent damaged part.
Regards.
to rate and post a comment
(4)
Martin Martinez
re: error 60-0313 ge brightspeed 16
June 23, 2018 01:54
If you need assistance please don't hesitate in contact me.
to rate and post a comment
(38)
(5)
Juan de la Cruz Martinez
re: error 60-0313 ge brightspeed 16
June 23, 2018 01:54
Need more information, could be arcing tube, tank. Post the error log
to rate and post a comment
(6)
Leo Lee
re: error 60-0313 ge brightspeed 16
June 23, 2018 01:54
Replace tube
to rate and post a comment
(11)
(1)
Maurice Dilick
re: error 60-0313 ge brightspeed 16
June 24, 2018 12:31
send me your Email for a possible solution. mdilick@gmail.com
to rate and post a comment