SEARCH
Current Location:
>
>
>
> Esaote Mylab30 service manual

Esaote Mylab30 service manual

Tags: Ultrasound

(4)
(2)

Phil Gillam

Esaote Mylab30 service manual

March 13, 2018 09:06

Hi All,

Looking for Esaote MyLab 30 Service manual

Thanks

2 people liked this
Log inor Register

to rate and post a comment

(90)
(8)

Ramon Portillo

re: Esaote Mylab30 service manual

March 14, 2018 09:40

What kind of problen do you have?

Log inor Register

to rate and post a comment

(4)
(2)

Phil Gillam

re: re: Esaote Mylab30 service manual

March 14, 2018 03:17

Hi Ramon,
Sometimes it will not switch off, you cannot save and it does not allow patient data to be entered. Also flickering icon on top, but cannot see what it is.
The model year is 2005
Thanks

Log inor Register

to rate and post a comment

(22)
(5)

Fedor Uvarov

re: re: re: Esaote Mylab30 service manual

March 17, 2018 01:46

Hi Phil!
You have several problems with the device. Most likely the hard drive is faulty.
What needs to be made.
1 To make the copy of the hard drive Akronis.
2 To write down codes of licenses.
To remove patients from the database, it will be very long (it borrowed me all night long)
3 To disassemble completely the device and to clean from dirt and dust. On board of the computer to remove the black block with a radiator and to change thermopaste on the central processing unit.
4 To replace the hard drive
There can be a problem, hard drives of the IDE format aren't issued any more.
I established Solid-state
disk. For its installation will be necessary the IDE adapter - SATA, the SATA cable, the poiwer splitter for SATA. I bought adapters in China, with board of the adapter the socket deleted SATA and soldered a SATA cable directly (otherwise isn't located instead of an old disk) Kabel stretched under the case to CD rom, in the same place established a new disk.
Several devices are remade, normal weeds more than a year!

Log inor Register

to rate and post a comment

(414)
(34)

DMEDS

re: Esaote Mylab30 service manual

March 19, 2018 09:35

Dear Sir,
I have all documentation for mylab 50 , mylab 70,
if you need it contact me,
thanks
with best regards

magmesme@gmail.com

Log inor Register

to rate and post a comment

Repairs for less with FREE Transducer EVALS! CALL NOW 1-888-838-7488

If you have a broken or defective probe, why not attempt to repair before purchasing? This could save you $1,000’s! With a free evaluation we can let you know the cost of repair if applicable. Call today: 1-888-838-7488 Email: sales@sentinelimaging.net DOTmed Certified DOTmed 100

 

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2018 DOTmed.com, Inc.
ALL RIGHTS RESERVED