SEARCH
Current Location:
>
>
> Fuji CR Prima

Fuji CR Prima

(21)
(2)

Pablo Delgado

Fuji CR Prima

October 09, 2018 04:38

Hi colleagues,

Please can anybody help me? I am having a trouble with Fuji CR Prima, it powers on and after some minutes (2 or 3) it shows 444 error on screen. Please help help. Thanks in advance.

Log inor Register

to rate and post a comment

(4)

Ruwan Wijesooriya

re: Fuji CR Prima

October 10, 2018 08:46

- Check for breakage of the sensor actuators.
- Check if the motor is working.
- Reseat the SND board connectors.
- Check the SND board fuses.
- Replace the sensors or the motors.

Log inor Register

to rate and post a comment

(14)
(2)

PABDEL

re: re: Fuji CR Prima

October 11, 2018 08:07

Thanks Ruwan, I´ll check your suggestions.

Log inor Register

to rate and post a comment

(4)

Ruwan Wijesooriya

re: Fuji CR Prima

October 10, 2018 08:46

444 error code is "Subscanning grip roller
positioning error"

Log inor Register

to rate and post a comment

RaySafe helps you avoid unnecessary radiation

RaySafe solutions are designed to minimize the need for user interaction, bringing unprecedented simplicity & usability to the X-ray room. We're committed to establishing a radiation safety culture wherever technicians & medical staff encounter radiation.

 

advertisement

 

advertisement
advertisement
Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2018 DOTmed.com, Inc.
ALL RIGHTS RESERVED