Fuji Fcr Prima question for Error 270
October 12, 2016 10:12
Hello. I have the following situation: I have Error 270, but only Warning(11270). I change to show it only in Error Log. Do I need to do something? To clean the lighting guide, or calibrate S-value ?
to rate and post a comment
re: Fuji Fcr Prima question for Error 270
October 13, 2016 11:02
No. Its just warning and its not important. You can disable this massage in RU settings
re: re: Fuji Fcr Prima question for Error 270
October 18, 2016 06:39
Okay, I disable it. But what is this warning? Why it appear in RU ?
May 13, 2019 10:30
Hi i have a problem regarding error 252 in prima t reader where it is an intermittent issue,so kindly suggest me on which parts do i need to replace or what solution do i need to offer to the customer
re: re: re: Fuji Fcr Prima question for Error 270
May 15, 2019 10:27
Error 10252: [During bootup or routine processing]
The image reading error occurred.
Check the error log for other errors. If any error occurs, analyze it.
- Check the CPU board fuses. Replace the PSU27A power supply,
the PSU27B board and CPU board if the fuse blowout recurs
immediately after replacement of the fuses.
- Reseat the connectors connecting with the scanning optics unit.
- Replace the scanning optics unit.
- Replace the SED board.
- Replace the cables connecting from the SED board to the CPU
- Replace the CPU board.
At Atlas Electronics we don’t sell new monitors so we are highly motivated to repair your existing equipment. We repair all makes and models of Surgical Monitor Displays since 1981!
Call Nick at 214-923-4229 or email direct email@example.com