GE Revolution darc
June 01, 2021 10:24
Hello. Our ct had network setting problem reaching pacs. Anyhow, I've tried to change some options in reconfig. Changed DARC subnet to user defined IP. After reboot, CT does not go to normal start (ct app does not start). I have only OC initilazing on both screen. On left there is shell window on right options to reboot, shutdown, xterm, Kvm start and Virt viewer. On xterm window it shows ctuser@darc instead of ctuser@ct99.
How to fix that? How can I return to ctuser@ct99, so I can go to su - and do reconfig again?
to rate and post a comment
re: GE Revolution darc
June 02, 2021 12:53
Open shell and write start then Enter
Juan de la Cruz Martinez
Don't you get the "you have 5 second to stop applications" pink sign?
June 02, 2021 12:54
You will have to reload software... Unless you wrote down the IP of the DARC... Id suggest a fresh reload. Hopefully you have a system state with the scanner.
re: re: GE Revolution darc
June 04, 2021 10:53
Yes, GE service reloaded software.
June 02, 2021 02:11
CT Apps will not automatically start after a reconfig. In a shell window, type “st”.
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com Call 813-925-1314