Gendex 8500 Dde Wont Return To Start - Service Technicians Forum

Gendex 8500 DDE wont return to start

(1)

Thomas Sherlock

Gendex 8500 DDE wont return to start

February 11, 2020 10:24

On the last panorex I took, the button was released before the final 2 beeps were heard. Now the head will not return to the start position. It will start to move but stop after a 2inch movement and beep. I have to shut it down and start it up and it does it again. It will not return to the start postion.
Thanks

Log inor Register

to rate and post a comment

ProCare - Let us keep your MRI system up and Running with Confidence!

ProCare ensures that the medical equipment you rely upon performs at an optimum level! Our engineers take pride in fast response time leading to less down time! Let us keep you Running With Confidence! Call 855.367.4330 to speak direct with an engineer.

advertisement

 

advertisement

 

advertisement

 

advertisement