Over 1250 Cleansweep Auctions End Today - Bid Now
Over 750 Total Lots Up For Auction at Five Locations - Over 800 Texas Auctions End Tomorrow 09/30 - Bid Now, NC 10/05, FL 10/06, CA 10/07, NY 10/11

How to pull DICOM config from Fuji FCR-XG1 and Drypix 1000?

(8)

Craig Pahigian

How to pull DICOM config from Fuji FCR-XG1 and Drypix 1000?

January 08, 2008 09:00

Hi, folks. Can anyone tell me how to get the current DICOM configuration off a Fuji X-ray setup consisting of an FCR-XG1 and Drypix 1000? The Dell PC racked with the XG1 is running FCR V2.1(B), but I can't find anything in the menus that will take me to a DICOM-configuration page.

I am wondering if I need to boot some special maintenance floppy or maintenance CD...

Thanks in advance,
Craig

Log inor Register

to rate and post a comment

(2)

QAMAR ZAMAN

Re: How to pull DICOM config from Fuji FCR-XG1 and Drypix 1000?

January 09, 2008 01:26

http://www.x-ray-cr.page.tl

Log inor Register

to rate and post a comment

S Govindarajan

Re: How to pull DICOM config from Fuji FCR-XG1 and Drypix 10

January 11, 2008 07:00

Hi,

We had tried pulling out dicom on a toshiba system configured for Kodak by going to the shell under unix and give kill imager.
and then reconfigure it for non diconm printers under protocol
manager.May be it might work.You may contact kakhagv@caucasus.net.He may be able to help you.
G.Rajan

Log inor Register

to rate and post a comment

(8)

Craig Pahigian

SUMMARY: How to pull DICOM config from Fuji FCR-XG1

January 12, 2008 06:38

Thanks for the replies. I was able to contact someone with a similar unit. Here are the instructions:

1. Click the FCR button at the upper-right corner of the screen.

2. User Utility

3. OK

4. TERMINATE (Will close the application and show the Windows desktop)

5. Go to "Program Files"\Fujifilm\IIP\System\"Setup Configuration Item"\"Network Config" and find a utility named ipserviceutility.exe. Run it.

6. A menu will appear with a hierchical list of properties. This is where you can set up all the DICOM parameters.

Log inor Register

to rate and post a comment

(20)
(1)
(3)

John Vanderwerf

re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

February 22, 2013 10:09

ipserviceutility.exe ask"s for a password, do you have it, appreciated, John.

Log inor Register

to rate and post a comment

Shawn Broussard

re: re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

February 23, 2013 04:52

fieldengineer. lower case

Log inor Register

to rate and post a comment

(20)
(1)
(3)

John Vanderwerf

re: re: re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

March 01, 2013 10:13

Allows me into ipserviceutility. I make changes and reboot but does not save changes. Unable to close program, am I missing something?

Log inor Register

to rate and post a comment

Shawn Broussard

re: re: re: re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

March 02, 2013 09:19

There is a config tab on the top left, I think that's what it says. In there you can save your changes then select yes, then go to the same tab to exit.

Log inor Register

to rate and post a comment

(20)
(1)
(3)

John Vanderwerf

re: re: re: re: re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

March 04, 2013 07:41

Thanks, PAC's provider wants me to change CR IP address. Can change PC ip addr using Win Net config but now lose communication to reader. Can change reader ip addr by running Programfiles/fujifilmcr/cr346uty.exeHow to reastablish communication between PC and reader?

Log inor Register

to rate and post a comment

(28)
(5)

biomedical

re: re: re: re: SUMMARY: How to pull DICOM config from Fuji FCR-XG1

January 11, 2015 12:33

Sir can u hellp me I need softwer for redar ip change

Log inor Register

to rate and post a comment

advertisement

Upcoming Auction Events

Houston Liquidator
TIMED Ending Soon
Sep 30, 2022 (831 lots)
Tekyard Medical
TIMED
Oct 05, 2022 (399 lots)
USEDSYNTHES.COM
TIMED
Oct 06, 2022 (50 lots)
ZRG Medical
TIMED
Oct 07, 2022 (93 lots)
Sunnking inc.
TIMED
Oct 11, 2022 (236 lots)