Kodak Dryview 5800 Laser Imager Error 36935 - Service Technicians Forum

KODAK DryView 5800 Laser Imager Error 36935

(58)
(13)
(5)

Eduardo Tognon

KODAK DryView 5800 Laser Imager Error 36935

March 30, 2012 06:13

I have a problem in KODAK DryView.
Error 36935 when the power up.
Please, any help is welcome.
I need to service manual, and spare parts for this machine.
Thanks
Eduardo
BRAZIL
eduardo@tognon.com.br

Log inor Register

to rate and post a comment

(40)
(6)
(1)

Marcos Sanchez

Re: KODAK DryView 5800 Laser Imager Error 36935

April 07, 2012 05:29

Hi.
This information say the manual...

Description
This error occurs when the LOCAL PANEL does not receive communications
from the Machine Control System (MCS). The LOCAL PANEL waits for 50
seconds, then generates a fake button press in an attempt to provoke
communications from the MCS. After an additional 10 seconds, if the LOCAL
PANEL has not received MCS communications, this error is displayed on the
LOCAL PANEL User Interface. The error clears when the LOCAL PANEL
detects MCS communications.
System Impact
Unknown. If the MCS is down, the printer will not print films. If the problem is
limited to communications, the printer may be able to print films.
User Action
1. Shut down the Imager, then restart the Imager.
2. If the error persists, call for service.
FE Action
None

Whise...

Log inor Register

to rate and post a comment

(1)

Fernando Enriquez

Re: KODAK DryView 5800 Laser Imager Error 36935

April 15, 2012 04:47

i'm experimenting the same problem whit code 36938

i'm already " Shut down the Imager, then restart the Imager."

but the problem don't disappear,i'm unable to call especial-iced service. i'm medical engineering and looking for a clue about basic service of Machine Control System (MCS)or how to solve the problem by my own.

i hope your help.

best regard

Log inor Register

to rate and post a comment

(40)
(9)

BIO IMAGEN

Re: KODAK DryView 5800 Laser Imager Error 36935

April 20, 2012 03:30

Hello Fernando

You have to do a reload of the printer software as it corrupted the system.

On the version of the software team must be from the v.2.1 or higher.
You have to acerce an Engineer Carestream service.

Because when you have to recharge again acerce calibration of equipment and configurations that can only be done with the software service.

Any query you write to crisjoseq@hotmail.com.

Sincerely.

Jose Quisca

Log inor Register

to rate and post a comment

(21)
(6)

MTC

re: Re: KODAK DryView 5800 Laser Imager Error 36935

November 25, 2019 05:46

Dear

We have Dryview 5800 never used. Do we need to upgrade s/w version now for new films ?

Log inor Register

to rate and post a comment

zain shah

re: Re: KODAK DryView 5800 Laser Imager Error 36935

February 07, 2014 03:56

Can some one help in forwarding driver of Kodak 5800.

Zain
matora@cyber.net.pk

Log inor Register

to rate and post a comment

zain shah

re: Re: KODAK DryView 5800 Laser Imager Error 36935

February 07, 2014 03:56

Can some one help in forwarding driver of Kodak 5800.

Zain
matora@cyber.net.pk

Log inor Register

to rate and post a comment

(1)

(1)

Mohammad Eftekharian

re: KODAK DryView 5800 Laser Imager Error 36935

January 05, 2014 04:04

please install software version 2.5. If it didn't fix the problem maybe HDD,mainboard or datapath board are defective. In these case you have to replace them with new part

Log inor Register

to rate and post a comment

zain shah

re: re: KODAK DryView 5800 Laser Imager Error 36935

February 07, 2014 03:57

Can some one help in forwarding driver of Kodak 5800.

Zain
matora@cyber.net.pk

Log inor Register

to rate and post a comment

(21)
(6)

MTC

re: re: KODAK DryView 5800 Laser Imager Error 36935

November 25, 2019 05:46

Hello. Do you have latest software ?

Log inor Register

to rate and post a comment

zain shah

re: KODAK DryView 5800 Laser Imager Error 36935

February 07, 2014 03:56

Can some one help in forwarding driver of Kodak 5800.

Zain
matora@cyber.net.pk

Log inor Register

to rate and post a comment

General Biomedical Service - New & Completely Truly Refurbished Ventilators

GBS offers service, repair, rentals & spare parts for your ventilators. With over 25 years experience our certified & factory-trained biomedical technicians refurbish all our used ventilators. Call today 800.558.9449

advertisement

 

advertisement

 

advertisement

 

advertisement