Kodak POC 120 update error?
December 06, 2019 09:53
After updating from software version 2.5 to 3.0, the device blinks green lights after switching on and the laser motor accelerates. After resetting through the program, the device is ready to work, but when scanning, I get a long scan and a white image. Returning to version 2.5 with the FPGA and firmware update does not solve the problem. What are my actions? What needs to be checked or replaced? I hope for help.
to rate and post a comment
OEM trained nationwide service for NM, PET, PET/CT systems. Relocation, installation, parts, technical and clinical support. Contact us at firstname.lastname@example.org