Konica Regius 110 Moving Damage - Service Technicians Forum

Konica Regius 110 moving damage

(23)
(1)
(6)

Glenn R. Hammerquist

Konica Regius 110 moving damage

May 19, 2020 10:35

Can moving a Konica Regius 110 without locking the carriage in place cause damage to the Optical Unit?
Thanks, Glenn

Log inor Register

to rate and post a comment

(2)

Wildman901

re: Konica Regius 110 moving damage

May 20, 2020 10:23

Yes, there’s always a chance. Just bring it forward and lock it into place, like you would if you were cleaning the optics, If you’re just moving it within the department, going gently over the bumps.
If you are transporting it to another facility etc., I would put the shipping brackets on.

Log inor Register

to rate and post a comment

(23)
(1)
(6)

Glenn R. Hammerquist

re: re: Konica Regius 110 moving damage

May 21, 2020 10:37

The facility moved it over a tube stand rail without locking it in place and now they have a 06650 error

Log inor Register

to rate and post a comment

(356)
(72)
(2)

juan pablo amado

re: re: re: Konica Regius 110 moving damage

May 26, 2020 10:48

06650 FPGA error (failure on event
driver access)
Failed on event driver access.
Confirm the following when it recurs.
1. Replace only the CIU and confirm the
operation.
(Especially around the high-speed serial
cable)
2. After backuping the circuit board data,
replace both CIU and CF card, restore the
circuit board data, and confirm the
operation.

Log inor Register

to rate and post a comment

ProCare - Let us keep your MRI system up and Running with Confidence!

ProCare ensures that the medical equipment you rely upon performs at an optimum level! Our engineers take pride in fast response time leading to less down time! Let us keep you Running With Confidence! Call 855.367.4330 to speak direct with an engineer.

advertisement

 

advertisement

 

advertisement

 

 

advertisement