Alfredo José Martinez Perales
Logic alpha 200 set date and time
August 02, 2016 10:49
I have a scanner Ge Logiq alpha 200 that you 've changed the system battery . Now do not know how I can change the date and time of the system. I connect with the service port but me nothing appears on the hiperterminal.Lo did once in a logiq 400, but this is not as connect and can not find information in the manuals. Thanks for your help , greetings.
to rate and post a comment
re: Logic alpha 200 set date and time
August 02, 2016 06:14
2--3 SERVICE MENU
2--3--1 Service Menu Over view
Arrow Up To move from menu to menu
Ctrl + X To Exit submenu in System Diagnosis
Ctrl + R To Exit Service menu or to enter Service Top menu.
Instead of Arrow keys the Trackball can be used to select item through the Service Menu.
Follow these steps to enter the Service Menu.
Probes should be installed in the port and Blue Shift key should be off before take these steps.
1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys.
2. Input the PASSWORD and press Return key.
The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5.
Service Utility MENU : Top Menu 99/03/12 09:16:37
Current Software Version is 3.0
Key Operation History
Initialize :1 (1:America 2:Europe 3:Asia 4:Japan)
System Clock Adjust
i can send you a manual but need an email address
re: re: Logic alpha 200 set date and time
August 03, 2016 02:48
Thanks Lenny, my email is firstname.lastname@example.org
October 26, 2016 10:57
Hello.. I am having the same problem with my date and time on the Alpha 200 after a battery change. Did you receive a solution? Please help.
A down system is not a good day.
September 13, 2017 10:57
Hi LENNY,please send it to me i have same problem and if possible password too please thanks
email id email@example.com
re: re: re: Logic alpha 200 set date and time
September 14, 2017 09:07
September 16, 2017 04:30
After changing the battery in my Logic alpha 200 it stops at the starting screen (Logic alpha 200 Version 2.1) and won't go into the normal examination mode. Can you help me?
firstname.lastname@example.org Thanks a lot!
July 13, 2018 02:39
Hi Lenny, can I get password to Logic Alpha 200 from you? My email adress email@example.com
July 31, 2018 10:31
Sir please send me a password
Please send me a password my email address is firstname.lastname@example.org
December 03, 2019 09:31
Please can your send me the user manual and thank you very much
At Atlas Electronics we don’t sell new monitors so we are highly motivated to repair your existing equipment. We repair all makes and models of Surgical Monitor Displays since 1981!
Call Nick at 214-923-4229 or email direct email@example.com