Over 400 Total Lots Up For Auction at Two Locations - MN 11/30, CA 12/02
Visit DOTmed at RSNA in Chicago. Booth 6801

Mx8000 IDT 16 Slice

Tags: CT

Posted by an Anonymous User

Mx8000 IDT 16 Slice

September 12, 2013 12:23

When we turn on the Mx8000 16 IDT, there's a error message " Timeout period expired, Not ready: IRS"
It is very urgent and important matter to us, because we have plan to test for KFDA approval.

Your kindly advice on this matter would be apprecited.

Log inor Register

to rate and post a comment

(114)
(10)
(6)

Manuel Brugat

re: Mx8000 IDT 16 Slice

September 12, 2013 07:08

The IRS is the second computer in your system. I do not know what your configuration s on this machine but make sure this computer is running first of all. Make sure also that the fiber optical cable is not broken and it is connected correctly. Of curse, when I say to make sure the IRS computer is running, there are many things to make sure on the IRS. But these are the things to look for initially. Good luck. If you are here locally in Miami/Fort Lauderdale area I may be able to help you more.
Sincerely:

Manuel Brugat/Image Instrumentation, Inc.

Log inor Register

to rate and post a comment

(105)
(11)
(3)

Gustavo Volpi

re: Mx8000 IDT 16 Slice

September 12, 2013 07:08

Write your e-mail. I can help you.
Good luck.

Gustavo.

Log inor Register

to rate and post a comment

(30)
(9)
(1)

Francesco Palmieri

re: Mx8000 IDT 16 Slice

September 12, 2013 07:09

IRS checks your computer
the problem may be given by a malfunction of some card or pc itself.

Log inor Register

to rate and post a comment

(45)
(6)

Dustin Zimmerman

re: Mx8000 IDT 16 Slice

September 12, 2013 09:45

The IRS is your image reconstruction computer. It is responsible for taking the raw data from your detector and turning it into an image. The most common problem is your back projector board in this computer. You can toggle between computers on your monitor and see if it is coming on-line. If it is not coming up at all check your power supply. Watch it boot up if that is ok and see if it comes up. If it comes up there is software embedded on the system to run diagnostics on the boards internal to the computer. If it comes on but doesn't fully boot then try reloading software. If that doesn't work hard drive or motherboard is probably defective.

1 person liked this
Log inor Register

to rate and post a comment

Albert Creo

re: re: Mx8000 IDT 16 Slice

April 22, 2014 10:08

NO, check IP address in the IRS and the HOst computer

Log inor Register

to rate and post a comment

saju

re: Mx8000 IDT 16 Slice

September 13, 2013 07:51

contact me can fix this sajubhas@gmail.com

Log inor Register

to rate and post a comment

(9)
(1)

Golden Nwobilor

re: re: Mx8000 IDT 16 Slice

December 25, 2015 07:42

I actually have the same problem now looking for who will assist me

Log inor Register

to rate and post a comment

(5)

(38)

Rami Marom

re:Mx8000 IDT 16 Slice

December 26, 2015 10:17

Please email me for any assistance if you need with Mx8000idt , rami@mediram.net

Log inor Register

to rate and post a comment

ISS - Contact Us Today For All Your Contrast Injector Needs: 888-667-1062

Your comprehensive contrast injector solution for 10 years to include: on-site service, telephone technical support, depot repair with loaner options, parts sales, injector sales, injector install & de-install, Level 2 & beyond training.

advertisement

Upcoming Auction Events

Tekyard Medical
TIMED
Nov 30, 2022 (313 lots)
ZRG Medical
TIMED
Dec 02, 2022 (107 lots)