SEARCH
Current Location:
>
>
>
> Need NX software of Agfa

Need NX software of Agfa

Tags: PACS / DR / CR / Digital, AGFA

(79)
(36)

Mohammad Ali Haidary

Need NX software of Agfa

February 04, 2014 08:04

Hello Dear Friends of Dotmed,
I hope you be fine and doing well. I need NX software and NX software installation. Would you please Assist me and send me the software and insatllation manual for me.
my email is alihry@hotmail.com

BR
Ali

2 people liked this
Log inor Register

to rate and post a comment

(58)
(16)

Rebel Cook

re: Need NX software of Agfa

February 04, 2014 06:17

What version of NX are you looking for?

1 person liked this
Log inor Register

to rate and post a comment

(79)
(36)

Mohammad Ali Haidary

re: re: Need NX software of Agfa

February 05, 2014 07:56

Any version no matter because i want for practicing the installation and configuration.

Log inor Register

to rate and post a comment

(58)
(16)

Rebel Cook

re: re: re: Need NX software of Agfa

February 05, 2014 04:02

I can get the software but it is usually 2 dvds so it is close to 7-8Gig. How would you like to recieve this software?

1 person liked this
Log inor Register

to rate and post a comment

(79)
(36)

Mohammad Ali Haidary

re: re: re: re: Need NX software of Agfa

February 06, 2014 01:39

Dear Mr. Rebel Cook,
Thanks for your close cooperation.
there are two ways.
1st way you need to take an image of your dvds and upload it to internet by suppose 4shared.com or dropbox. (please take the image by UltraISO)
Sencond way please send me by DHL or FedEx the DVDs.
Kindly search which is easeir for you.
However i thank you in advance for your close assits.
BR
Ali

Log inor Register

to rate and post a comment

(9)

Anatoliy Remnew

re: re: re: re: re: Need NX software of Agfa

February 01, 2015 10:28

Good day! Can you send me a link to download this software?

Log inor Register

to rate and post a comment

(2)

Sagi Levi

re: re: re: re: re: re: Need NX software of Agfa

June 27, 2015 03:41

Can you please send me a copy if you got one?

Log inor Register

to rate and post a comment

mahmpud nirab

re: re: re: re: re: re: re: Need NX software of Agfa

January 04, 2016 10:10

Can you please send me a copy if you got one?

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: re: re: re: Need NX software of Agfa

August 10, 2018 08:23

hi my friend, i have bought cr 30x recently from ebay, when i open nx workstation it showing error mess 310, i dont have software cd, please help me what i have to do, thank you very much, my email id is drreddysekhar@gmail.com

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: re: re: Need NX software of Agfa

August 10, 2018 08:22

hi my friend, i have bought cr 30x recently from ebay, when i open nx workstation it showing error mess 310, i dont have software cd, please help me what i have to do, thank you very much, my email id is drreddysekhar@gmail.com

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: re: Need NX software of Agfa

August 10, 2018 08:22

hi my friend, i have bought cr 30x recently from ebay, when i open nx workstation it showing error mess 310, i dont have software cd, please help me what i have to do, thank you very much, my email id is drreddysekhar@gmail.com

Log inor Register

to rate and post a comment

(2)

Sagi Levi

re: re: re: re: re: Need NX software of Agfa

June 27, 2015 03:41

Can you please send me a copy if you got one?

Log inor Register

to rate and post a comment

Roberto

re: re: re: re: re: re: Need NX software of Agfa

August 16, 2015 11:42

Please can you send for me a copy roberto-falcone@hotmail.it

Log inor Register

to rate and post a comment

Roberto

re: re: re: re: re: Need NX software of Agfa

August 16, 2015 11:42

Please can you send for me a copy?
roberto-falcone@hotmail.it

Log inor Register

to rate and post a comment

(7)
(1)

Marvin

re: re: re: re: re: Need NX software of Agfa

January 30, 2017 03:26

Hi
Can you send me a link to download please ?.. thanks friend

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: re: Need NX software of Agfa

August 10, 2018 08:23

Hi my friend, i have bought recently cr 30x from ebay without cd, when i open nx workstation it showing error mess310, want to reinstall the software again , if you have the software, please help me , mine is 1 edition with firewire , thank you so much., my email id is drreddysekhar@gmail.com

Log inor Register

to rate and post a comment

Roberto

re: re: re: re: Need NX software of Agfa

August 16, 2015 11:42

Please can you send for me a copy?
roberto-falcone@hotmail.it

Log inor Register

to rate and post a comment

(13)
(1)

Roberto Yerovi

re: re: re: re: Need NX software of Agfa

August 17, 2017 11:01

Dear Rebel:

Can you please send me a copy if you got one?

thank you

Log inor Register

to rate and post a comment

(1)

Jorge Lillo

re: re: Need NX software of Agfa

July 12, 2017 11:08

Good day! Can you send me a link to download this software?

Log inor Register

to rate and post a comment

(1)

JEFF ROSENFIELD

re: re: re: Need NX software of Agfa

May 02, 2018 09:53

Could you please send link to me

Log inor Register

to rate and post a comment

(130)
(9)

Ronald Swapp

re: re: re: re: Need NX software of Agfa

May 05, 2018 12:43

What version of NX are you looking for, I have up to NX20.0.
In order to upgrade your NX you'll also need to contact AGFA Global Support for an updated alf file. They will need your Dongle ID, Computer Serial number, mac address and possibly a fingerprint file. Only AGFA Support can generate the alf file.
Are you looking at upgrading for the sake of upgrading? Or are you having problems and think a software update will fix it.

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: Need NX software of Agfa

August 07, 2018 04:01

Hi , i recently bought cr 30 with computer through ebay, when i start computer , nx station is showing error(MESS 310), please give me any suggestion what to do, thanks,please send me if any sofware available, thanks.

Log inor Register

to rate and post a comment

(130)
(9)

Ronald Swapp

re: re: re: re: re: re: Need NX software of Agfa

August 08, 2018 09:08

Does NX Start? Or when it starts you get the message? Do you have the license dongle installed?
What version CR30, 1st or second generation (Firewire or ethernet)?

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: re: re: Need NX software of Agfa

August 08, 2018 04:03

IT STARTS WITH INITIAL WINDOW OF NX THEN THIS ERROR MASSAGE, I HAVE LICENSE DONGLE INSTALLED, IT IS FIREWIRE ONE, NOT SURE OF GENERATION, THANKS FOR THE RESPONSE

Log inor Register

to rate and post a comment

(130)
(9)

Ronald Swapp

re: re: re: re: re: re: re: re: Need NX software of Agfa

August 08, 2018 06:18

fyi: Firewire version is 1st gen, Ethernet is 2nd gen.

Did you make any changes to the system prior to starting up like changing the computer name?
If you changed the computer name, change it back to what it use to be. If it's an HP then it will be the HP serial number.
Did you change any passwords?
If so especially the administrator or crservice login's change them back.
If you don't know what they should be then e-mail me at: rtswapp@comcast.net

Can you get into the NX Configurator?

If you can load active configuration, then activate.
If you can't then NX is f'd up and you'll need to Start NX from factory default. Bear in mind doing so will wipe out your configuration.
So before doing that from the Configurator Export your configuration to a thumb drive call it Export day-month-year.
Also do a Save as but call it Save As day-month-year.
Also open up Exam and export the exam tree.
Also, save your ALF file you'll need it to reinstall the license.
The Mess310 is a basic error and is tied to numerous faults.

Solution:
The error in your case is most likely a timing error on database startup.
Start the NX Configurator and Activate to see if it corrects it.

Also look at your regional settings and make sure they are set up properly.


Also look at NX Services and make sure that they startup is automatic.

1 person liked this
Log inor Register

to rate and post a comment

(130)
(9)

Ronald Swapp

re: re: re: re: Need NX software of Agfa

May 07, 2018 09:28

Guys, you have to realize that updating the software is the least of your concerns. It won't do you any good to upgrade the software on a present fully functional NX system unless you contact AGFA Global Support and get a fresh license file that matches your dongle, mac address and workstation serial number and updated software.
Only AGFA can generate the license or alf file so be prepared before you think about upgrading NX software from your present version.
I guarantee you will be very disappointed if you do an upgrade and then find that the license is in a 30 day grace period. Then after 30 days you'll have a useless system.
And unless an authorized AGFA agent has the system serial number and dongle transferred to them they won't even be able to contact AGFA for an alf file.

Log inor Register

to rate and post a comment

(24)
(1)

Changsheng Liu

re: re: re: re: Need NX software of Agfa

May 07, 2018 09:29

Do you still need it?

Log inor Register

to rate and post a comment

(130)
(9)

Ronald Swapp

re: re: re: re: re: Need NX software of Agfa

May 20, 2018 03:13

Giving anyone the software won't do any good if they can't get a current alf file that nobody other than AGFA Global Support can get.

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: re: Need NX software of Agfa

August 10, 2018 08:24

hi my friend , i have bought AGfa 30 x recently from ebay, when i start nx station it showing error mess310, can you please give me solution or sofware, this is 1 st generation with firewire, my email id is drreddysekhar@gmail.com, thanks

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: re: Need NX software of Agfa

August 10, 2018 08:23

Hi my friend, i have bought recently cr 30x from ebay without cd, when i open nx workstation it showing error mess310, want to reinstall the software again , if you have the software, please help me , mine is 1 edition with firewire , thank you so much.my email id is drreddysekhar@gmail.com, thanks

Log inor Register

to rate and post a comment

(14)

Reddi Kondapally

re: re: re: Need NX software of Agfa

August 10, 2018 08:23

Hi my friend, i have bought recently cr 30x from ebay without cd, when i open nx workstation it showing error mess310, want to reinstall the software again , if you have the software, please help me , mine is 1 edition with firewire , thank you so much.my email id is drreddysekhar@gmail.com, thanks

Log inor Register

to rate and post a comment

THE (LEADER) IN MEDICAL IMAGING TECHNOLOGY SINCE 1982. SALES-SERVICE-REPAIR

Special-Pricing Available on Medical Displays, Patient Monitors, Recorders, Printers, Media, Ultrasound Machines, and Cameras. This includes Top Brands such as SONY, BARCO, NDS, NEC, LG, EDAN, EIZO, ELO, FSN, PANASONIC, MITSUBISHI, OLYMPUS, & WIDE.

 

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2018 DOTmed.com, Inc.
ALL RIGHTS RESERVED