dismiss

Clean Sweep Live Auction on Thur. March 28th. Click to view the full inventory

SEARCH
Current Location:
>
>
> OEC 9400 C-ARM

OEC 9400 C-ARM

(163)
(14)
(8)

Ed Ramirez

OEC 9400 C-ARM

June 16, 2010 11:24

LOOKING FOR A BOOT-UP FLOPPY FOR THIS UNIT. THANKS

Log inor Register

to rate and post a comment

(38)
(1)

cevik sadi

Re: OEC 9400 C-ARM

July 06, 2010 10:47

http://www.gmecorp-usa.com/IM/XR/CA/OEC/9400/MU/TP/oec9400_main_unit_tp_01.html

Log inor Register

to rate and post a comment

(87)
(14)

alejandro mendoza

Re: OEC 9400 C-ARM

July 12, 2010 03:11

Ed
i can help you only need serial nomber
regads

1 person liked this
Log inor Register

to rate and post a comment

(38)
(6)

Ismael Alvarado

Re: OEC 9400 C-ARM

January 24, 2011 09:54

Hello Alejandro.
I have an OEC 9400 C-Arm that started having problems showing PLEASE WAIT..... A7. I have checked the batteries and a connector was disconnected. Then this message no longer happens but DATA CRC ERROR was showing in the C-Arm display. Every time the C-Arm is turned ON, DATA CRC ERROR is showed just after PLEASE WAIT.... B8 message. For just a fraction of a second the display shows RETRYING DISK and then DATA CRC ERROR. Rotating any of the KVp or mA/mAs knobs the DATA CRC ERROR message changes to RETRYING DISK. The same happens if a key is pressed in the C-Arm. The red display in the technique board remains showing 8. The bargraph for volts shows 210 V, and the milliamps bargraph is off. The red display at back of the cart shows E0. The red LED in analog PCB is off.
Do you have any idea on what is happenning?
I will appreciate any comments or suggestions about this issue.
Thannk you very much.
Ismael Alvarado.
ismael_alvarado@live.com

1 person liked this
Log inor Register

to rate and post a comment

(38)

mcxrayca

re: Re: OEC 9400 C-ARM

August 18, 2016 12:38

Hello Ismael,

I have a fail in the oec9400, the monitor is perfetc boot up but the satnd of the carm display please wait a7, can you help me?
my email is mcxrayca@hotmail.com

Log inor Register

to rate and post a comment

(1)

willian herbas

re: Re: OEC 9400 C-ARM

February 22, 2019 09:30

good night I write you for the error that I get wait A7 and it is stuck does not advance please could pass me the information to be able to solve many thanks

Log inor Register

to rate and post a comment

(38)
(6)

Ismael Alvarado

Re: OEC 9400 C-ARM

March 04, 2011 09:56

Hello Alejandro.
Just to say thank you for all that support you kindly give to me to solve the problem I had with my OEC 9400. It is working fine thanks to the advices you shared with me. The boot up floppy disk is working as expected.
My best regards.
Ismael Alvarado.

Log inor Register

to rate and post a comment

(9)
(1)

christian boa

re: Re: OEC 9400 C-ARM

September 11, 2012 09:00

Hi Sir, could I ge a boot up floppy copy. My oec 9400 have a boot up monitors problem. Thanks. Christian BOA

Log inor Register

to rate and post a comment

(8)
(2)

Dvez

re: Re: OEC 9400 C-ARM

December 14, 2014 10:40

We have a DATA CRC ERROR in our OEC 9400 system. Can you please help us to resolve this problem? My e-mail: dshatvoryan@yahoo.com

Log inor Register

to rate and post a comment

(3)

Juan Gaytan

re: Re: OEC 9400 C-ARM

March 15, 2019 08:06

Hi Alejandro can you help me my email is: Juan.p.gaytan@gmail.com
thanks
regards.

Log inor Register

to rate and post a comment

(9)
(1)

christian boa

re: OEC 9400 C-ARM

September 11, 2012 09:00

Hello, could you send me copy of boot up floppy. I' ve same problem with my OEC 9400. Thanks.
Christian BOA

Log inor Register

to rate and post a comment

Probo Medical | We Buy, Repair, and Sell New and Used Ultrasound Equipment

We buy, repair, & sell new, used, and refurbished ultrasound probes and stock systems. 5000+ probes in stock. All probes are thoroughly tested & come with a warranty. Contact us about our special offer probes today! 317-759-9210 or sales@probomedical.com DOTmed Certified DOTmed 100

 

advertisement

 

advertisement

 

advertisement

 

advertisement
Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2019 DOTmed.com, Inc.
ALL RIGHTS RESERVED