Radi Analyzer Xpress 12711 Boot - Service Technicians Forum

Over 1300 Total Lots Up For Auction at Four Locations - NJ Cleansweep 03/02, OK 03/04, NJ 03/08, CA 03/12

RADI analyzer Xpress 12711 boot

Tags: Monitors/ICU/CCU

(1)
(2)

Radoje Albijanic

RADI analyzer Xpress 12711 boot

May 07, 2015 10:43

I have a problem with Radi analzyer Xpress 12711, when it's starting it displays
''Floppy drive(s) fail (40)
CMOS checksum error- defaults loaded
press F1 to continue, press DEL to enter Setup''

button F1 on display wo'nt do the job, there is no DEL button, so can anyone please tell me what to do and where to insert keybord or something. thanks

2 people liked this
Log inor Register

to rate and post a comment

(5)

Edgar Solano

re: RADI analyzer Xpress 12711 boot

December 07, 2017 09:25

Hi!, Did you could solve this error code oroblem?

Log inor Register

to rate and post a comment

(2)
(3)

Alex Moiseev

re: re: RADI analyzer Xpress 12711 boot

February 20, 2018 09:31

I had fixed ''Floppy drive(s) fail (40)" by connecting keyboard to the mainboard directly, but problem with correct BIOS settings for boot device still persist. Do anybody know correct settings for it?

Log inor Register

to rate and post a comment

(2)

Sie yuru

re: re: re: RADI analyzer Xpress 12711 boot

January 14, 2019 09:42

Unfortunately I meet same problem.

Could you teach me how to connecting keyboard to the mainboard?

Log inor Register

to rate and post a comment

(1)

Stefan Petre

re: re: re: RADI analyzer Xpress 12711 boot

February 25, 2019 10:23

Hello, could you please describe how did you connected the keyboard.
Thank you!

Log inor Register

to rate and post a comment

onkar jadhav

re: re: re: RADI analyzer Xpress 12711 boot

May 01, 2019 10:26

fixed ''Floppy drive(s) fail (40)" by connecting keyboard to the mainboard directly

Log inor Register

to rate and post a comment

(1)

Matthias Schneider

re: re: re: re: RADI analyzer Xpress 12711 boot

February 22, 2021 10:55

Hi

Did you resolve this problem? I have two mashine with the sam problem

Best regards

Matthias

Log inor Register

to rate and post a comment

(2)
(3)

Alex Moiseev

re: RADI analyzer Xpress 12711 boot

February 20, 2018 02:13

If you need correct settings for this device just email me.

3 people liked this
Log inor Register

to rate and post a comment

(2)
(1)

Weizhuo Chen

re: re: RADI analyzer Xpress 12711 boot

July 05, 2018 11:12

I sent you an e-mail. I hope you can help me with the problem

Log inor Register

to rate and post a comment

(2)
(1)

Weizhuo Chen

re: re: RADI analyzer Xpress 12711 boot

July 05, 2018 11:12

I sent you an e-mail. I hope you can help me with the problem

1 person liked this
Log inor Register

to rate and post a comment

Jeong Namheon

re: re: re: RADI analyzer Xpress 12711 boot

September 19, 2018 08:23

Hello, I have totally same trouble, ''Floppy drive(s) fail (40)". So I really want to know correct settings for this device. Please, give me e-mail. Thanks.

Log inor Register

to rate and post a comment

Jeong Namheon

re: re: re: RADI analyzer Xpress 12711 boot

September 19, 2018 08:23

Hello, I have totally same trouble, ''Floppy drive(s) fail (40)". So I really want to know correct settings for this device. Please, give me e-mail. Thanks.

Log inor Register

to rate and post a comment

Jeong Namheon

re: re: RADI analyzer Xpress 12711 boot

September 19, 2018 08:23

Hello, I have totally same trouble ''Floppy drive(s) fail (40)". So I really want to know correct settings for this device. Please give me e mail. Thanks.

Log inor Register

to rate and post a comment

(3)
(2)

miguel euan mikol

re: re: RADI analyzer Xpress 12711 boot

December 21, 2018 10:37

ya te mande mail si me puedes ayudar

Log inor Register

to rate and post a comment

Alberto SantAnna

re: re: re: RADI analyzer Xpress 12711 boot

October 21, 2020 09:43

Hello, could you please describe how did you connected the keyboard.

Log inor Register

to rate and post a comment

(2)

Sie yuru

re: re: RADI analyzer Xpress 12711 boot

January 16, 2019 09:24

I also need correct setting.
Could you email to me.
Thanks a lot.

Log inor Register

to rate and post a comment

Jeong Namheon

re: RADI analyzer Xpress 12711 boot

September 19, 2018 08:23

Hello, I have totally same trouble ''Floppy drive(s) fail (40)". So I really want to know correct settings for this device. Please give me e mail. Thanks.

Log inor Register

to rate and post a comment

(3)
(2)

miguel euan mikol

re: RADI analyzer Xpress 12711 boot

December 21, 2018 10:37

ya te mande mail para las configuraciones correctas

1 person liked this
Log inor Register

to rate and post a comment

(3)
(2)

miguel euan mikol

re: RADI analyzer Xpress 12711 boot

December 21, 2018 10:37

ya te mande mail

1 person liked this
Log inor Register

to rate and post a comment

Auction Alert - Live Now: ZRG Medical Surplus Auctions March 12th

ZRG Medical closeout auctions take place on DOTmed.com. Bid today on 146 lots of medical equipment. Onsite or virtual inspection available. Please contact 760-438-8835 ext. 100 or email ZRGauction@zrgmedical.com for an appointment.

DOTmed Certified DOTmed 100
advertisement

 

Hitachi

 

RSTI Newsletter

Upcoming Auction Events

Therapeutic Technologies
TIMED
Mar 08, 2021 (178 lots)
ZRG LLC.
TIMED
Mar 12, 2021 (146 lots)