Siemens avanto shimmed but won’t pass phantom shim in tuneup
September 14, 2021 11:44
Hi all, any advice here would be appreciated. Siemens avanto is in shim specification. However, phantom shim in tune up won’t pass but it will in expert mode with the body coil and phantom with body loader or in expert mode with a head coil and small ball phantom. I don’t understand why I can get phantom shim to pass willingly expert mode but not in normal tune up mode. When the system boots all options in system control are fine and it boots normally. Gradient polarity has been checked and is wired normally. Any thoughts or offers of help would be appreciated. Software is VB19.
to rate and post a comment
ElsMed engineers are located in four different countries. 24 hour response time to any service call. Service agreement provided for end-users range from a 6 month period to a 3 year period and covers all system spare parts.