Siemens S2000 monitor UTAS19C "NO VIDEO INPUT"
November 25, 2016 02:32
I have a problem with Siemens S2000 ultrasound. Year of manufacture 2011/07.
After connecting to the power supply. Cooling moniotora still works.
When I pressed the button ON I hear ultrasound start properly, but the monitor still displays "NO VIDEO INPUT"
and a black screen all the time.
When I connect to the "EXT. MONIOTR" moniotr external displays everything perfectly.
Please help me solve the problem.
to rate and post a comment
re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT
November 27, 2016 05:46
I plugged an external computer directly to the VGA port on the monitor. The image is displayed correctly, but in the upper left corner shows "FPD TEST OK". The message does not disappear. The message is distorted. Do not operate the buttons or monitor settings.
re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT
February 26, 2018 04:30
Good afternoon. I have the same problem with UTAS19C.
Did you solve the problem? If so, how? Thank you.
you can answer the mail email@example.com
re: re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT
December 07, 2018 08:55
Same problem. How to solve? Cheaper than replacing.
April 23, 2019 11:13
I have fix the problem.contact me by email
February 12, 2020 10:14
The monitor is connected to a personal computer.
The computer and monitor are turned on.
If you turn off the monitor's power and connect it again, then:
- the screen saver appears for 1-2 seconds.
- then the computer desktop for a second
- then the image disappears
The monitor is connected via VGA.
Via DVI does not show at all.
220 V comes to the monitor.
This appeared after the hard drive died on the ultrasound and I changed the BIOS of the ultrasound computer.
Redstone Healthcare - Exceptionalism is what we do. Offering new and reconditioned ultrasound systems, transducers, parts and service nationwide from machines to transducers, C-arms and more! CALL 1-844-2-Redstone