Over 1000 New Jersey Auctions End Tomorrow 01/27 - Bid Now
Over 300 Total Lots Up For Auction at Two Locations - NY 02/02, UT 02/03

Software load for Logiqbook Ultrasound

Tags: Ultrasound, GE

(4)

Sean Egan

Software load for Logiqbook Ultrasound

March 04, 2018 10:17

Hello,
I purchased software from a member of this forum to reinstall onto my Logiqbook U/S machine as it was locking on startup with "Windows 2000 could not start because the following file is missing /system32/ntoskrnl.exe. Please re-install a copy of the above file.
So I was sent a ghosted copy of a working platform from this member. The problem is that when I ghosted it to the hard drive, it copied perfectly, but still will not run, as it looks like there is no OS to run it ie. Windows 2000.
So I tried loading windows 2000 onto the machine, but it will not boot from the external CD drive, even though I have set it to do that from the bios menu.
I think what I need to do is copy windows 2000 onto the drive by cloning it on, and then loading the program, but that would require the operating disk or an .exe to do that.
Any suggestions, given that I only have the ghosted file?
thanks!

Log inor Register

to rate and post a comment

(42)
(6)
(7)

Joseph Asmaro

re: Software load for Logiqbook Ultrasound

March 05, 2018 09:43

Hi Sean,

I believe what happened was that you only got the application DVD without the OS, you would need both in order to reload the software.

Contact me at: jasmaro@toptiermedical.com if you require further assistance.

Log inor Register

to rate and post a comment

(77)
(16)

Brian Eberling

re: Software load for Logiqbook Ultrasound

March 05, 2018 10:32

You need the 2 disk set of the original installation discs. There is one disk that installs the operating system and the other installs the application software. Do you know what version of software that runs on your system?

Log inor Register

to rate and post a comment

(4)

Sean Egan

re: re: Software load for Logiqbook Ultrasound

March 06, 2018 09:19

I believe it is version 2.03. I remember when I first got the machine that an update came in the mail about 2 yrs later, and that was the only update. The machine is a Logiq book model# 2349933.

Log inor Register

to rate and post a comment

(280)
(43)

CRAIG WAMBURA

re: Software load for Logiqbook Ultrasound

March 05, 2018 10:33

System usually uses SYMANTEC to load the Windows 2000.
If you have any ghosting errors, first check on your hard drive.

Check the jumper settings on the CD Drive.....

I have a copy of the GE OS software for Logiq......

Please contact me at craig@telemed-technologies.com and we can solve your issue immediately

Log inor Register

to rate and post a comment

(4)

Sean Egan

re: re: Software load for Logiqbook Ultrasound

March 06, 2018 09:19

Hi Craig, I ghosted the image to 2 different hard drives, and tried them both. I get the same error with both, It goes through the boot process, then the ram check, then ‘operating system not found’ The CD drive is external, so there are no jumper settings for it. It is the Predator external cd drive that came with it.

Log inor Register

to rate and post a comment

We provide sales, service & repair for portable ultrasound systems & probes

If you have a broken Sonosite, Mindray, GE, Philips, Hitachi, or Aloka system or probe contact us today. Free ultrasound & probe EVALS with 1 Year Warranty on all repairs. We repair all orders in 1-5 days. Call 844-644-5440 Email: Sales@Lenard.Healthcare

DOTmed Certified DOTmed 100
advertisement

Upcoming Auction Events

Therapeutic Technologies
TIMED Ending Soon
Jan 27, 2023 (1010 lots)
Sunnking inc.
TIMED
Feb 02, 2023 (221 lots)
Primis Medical
TIMED
Feb 03, 2023 (117 lots)