SEARCH
Current Location:
>
>
> Toshiba Aquilion 16 RTM board fail

Toshiba Aquilion 16 RTM board fail

Tags: CT, TOSHIBA

(1)
(1)

TechnoMan

Toshiba Aquilion 16 RTM board fail

May 21, 2013 12:57

Not loaded main PC with the message "cannot connect to RTM". In block REC on the RTM board lits LEDs FAIL and CPU.
Diagnosed board through COM, but board only run with firmware BankB (jumper J24 on the board switches to neighboring position, thereby launched Motorola diagnostic firmware) and here we saw this program:
Copyright Motorola Inc. 1988 - 2006, All Rights Reserved

MCP820 Debugger/Diagnostics Release Version 2.0 - 02/07/06 RM01
COLD Start

Local Memory Found =08000000 (&134217728)

WARNING: Board Configuration Data Failure

MPU Clock Speed =500Mhz

BUS Clock Speed =100Mhz

Reset Vector Location : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE

L2Cache: 2048KB, 200Mhz
System Memory: 128MB, ECC Enabled (ECC-Memory Detected)

MCP820-Bug>

Also writes Board Information Block Checksum Error and all points are worth "????". As I understand it completely erased NVRAM memory with battery. And because of this does not start the main Toshiba firmware. How can I restore the board?
E-mail: Rudnih@bk.ru

1 person liked this
Log inor Register

to rate and post a comment

(5)
(1)

Yury Lurye

re: Toshiba Aquilion 16 RTM board fail

May 25, 2013 09:07

Replacing the RTM

Log inor Register

to rate and post a comment

(238)
(68)
(19)

Yuriy Kuznetsov

re: re: Toshiba Aquilion 16 RTM board fail

May 25, 2013 06:57

He knows it...He wants to restore the board :)

Log inor Register

to rate and post a comment

(88)
(22)

Anton Spaci

re: Toshiba Aquilion 16 RTM board fail

May 31, 2013 09:29

You have to connect your laptop to the rtm via teraterm software (look in service manual )
abort the boot of the rtm and show the bootline
something should be wrong here
The LED of the rtm should be off after boot of it
It could be also MHR board
You can make also test of these MHR if the bootline of your rtm is correct

let me knosw at anton.spaci@web.de

Log inor Register

to rate and post a comment

(73)
(8)

Vu Toan

re: Toshiba Aquilion 16 RTM board fail

June 10, 2013 09:39

You can do HWtest, FC drive test ...

Log inor Register

to rate and post a comment

(2)

turfa jhjah

re: Toshiba Aquilion 16 RTM board fail

July 27, 2013 09:43

Dear TechnoMan
Did you solve this???
if yes please let me know i have the same problem.
thnx

Log inor Register

to rate and post a comment

(88)
(22)

Anton Spaci

re: re: Toshiba Aquilion 16 RTM board fail

July 29, 2013 08:52

You can make the test above

Log inor Register

to rate and post a comment

(2)

turfa jhjah

re: re: re: Toshiba Aquilion 16 RTM board fail

July 30, 2013 08:27

it was SS/ADI PWB

Log inor Register

to rate and post a comment

(24)
(9)

Nuruddeen Mohammed Abdulbaqi

re: Toshiba Aquilion 16 RTM board fail

July 17, 2017 10:18

Hi TechnoMan.
Did you solved the problem? If Yes please kindly help me out, am also facing the same problem.

Log inor Register

to rate and post a comment

PHILIPS Mx-8000 IDT/Brilliance 16 Slice CT Scanner -----Worldwide leader!!

HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com Call 813-925-1314 DOTmed Certified DOTmed 100

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2017 DOTmed.com, Inc.
ALL RIGHTS RESERVED