Si deseas promocionar tu empresa de manera efectiva a nivel local e internacional, ¡has llegado al lugar indicado! Contáctame para agendar una cita y te mostraré cómo aprovechar al máximo nuestra plataforma para impulsar tu negocio.
Pepe Garcia
September 01, 2019 11:59
good day I would like to know if any of you have and can rent or sell the phantoms to calibrate a Kodak 8000c orthopantograph...
Jose Morillo
February 14, 2018 09:29
Dear colleagues I had a conversation with Chilen technologist that said me the process to calibrate the Optima 660 with a NON CENTERED phantom is inc...
Manuel Brugat
March 19, 2017 05:03
Hello friends Can someone give me help on a problem I have with the cradle of this Philips Brilliance water with Software version 235 Apparentl...
Francisco Garcia
December 29, 2016 10:05
Hi there I performed a tube alignment after replacing X ray tube on the system the process went allright it was until I tried to perform the Image Cal...
Mostafa Kamel
July 11, 2015 09:24
I am having a calibration failure when connecting this probe to a machine It asks for reconnecting the probe but it keeps happening I can see the ima...
Altima will inspire the trust, loyalty and commitment of our customers through positive relationships and collaboration, top quality equipment services, and a clearly superior value proposition. Call Today (469) 644-7063
Vic MayAl
May 12, 2014 04:23
HELLO EVERYBODY LOOKING FOR HELP TO CALIBRATE THE ANTI-SCATTERING GRID MOVEMENT OF AN AXIOM ICONOS R200 SYSTEM EACH TIME I PROCESS A CASSETTE ON A K...
Vic MayAl
May 03, 2014 01:55
Hi everybody Help needed for a MOBILETT PLUS HP system I have problems with a Mobilett Plus HP It does not work properly because mAs measuring is 10...
Vic MayAl
June 12, 2014 06:37
Hello everybody Im looking for help to calibrate a BENNETT HFQ SERIES X-ray generator Mod 12050P MA and mAs values are 20 below of those selected Doe...
Jordan Dickens
March 04, 2024 10:34
I am trying to get to where I Can check sensors on a old Orex carestream CR IT says it has a sensor issue and a stuck imaging plate Any advice Pleas...
Simion Marga
September 06, 2011 10:08
We need the best engineer who can make good final calibration and tuning of the Hitachi Airis Elite USA model parralel and rapid imaging...
Adepto Medical is an infusion pump rental, sales, and service company. Our focus is to deliver to our customers the best product and customer service support we can offer. Call (913) 261-9933
Ernesto Guerra
December 30, 2010 04:51
I NEED HELP TO DETERMINE THIS ERROR WHEN I TRY TO RAN FULL IMAGE CALIBRATION THE SYSTEM STOPS AND GIVES ME OPERATOR STOP THEN I GO TO THE ERROR LOG A...
Nathaniel Berg
February 13, 2007 09:33
We can not calibrate the arm motion for a GE Advantix Tilt-C plus remote RF room with Angio system The service manual refers to a DEBUG disc But we ...
felipe barrera
November 29, 2023 09:40
hi i have an hologic qdr 1000 that is scanning with x rays and stop and send me some messages hilow sequencing error and theres a button that say...
JOSE HERRERA
May 22, 2025 10:52
Hello colleagues I need your help I have a problem with the detector of a mammography machine brand Siemens model Mammomat MG Inspiration Software ...
service manual and period of calibration of PHILIPS MX 16
yves nama
February 28, 2024 10:59
BOnjour Collegues Our equipment requires a callibration after every three months and this despite the number of exams is it normal Without this cal...