From CA to NY and around the world we buy and sell your used imaging equipment at market value or higher. We offer spare MRI and CT parts, accessories and services supporting most OEMs. We also offer purchase, long or short-term Mobile MRI & CT rental.
Ricardo Delmonte
August 29, 2006 08:34
I have a hoop in the image I change q-maq of place and the problem persists it is possible to eliminate it by software As it is possible to be done ...
sunil Kumar
October 08, 2005 04:13
I am getting darker images with window shift towards lower valuesiewater phantom images showing CT values at -55 at 120 KV 2s and 4 sec scanthe images...
Colin Kelley Jr.
March 11, 2004 12:03
I am having trouble with the Quantamats of a GE DXD 350II showing up on images The chambers will show up on phototimed or manual techniques Calibrat...
Ivan Marian
April 10, 2025 10:12
Hello everyone The model fujifilm drypix plus prints the image on the film with an offset of about 3 cm from one of the lateral edges or prints the zo...
Ivan Marian
April 09, 2025 10:20
Hello everyone The model fujifilm drypix plus prints the image on the film with an offset of about 3 cm from one of the lateral edges or prints the zo...
Whether you're looking to purchase, repair, or rent monitoring devices, we've got you covered with our wide range of high-quality products and our exceptional customer service 800-777-6467 sales@pmbiomedical.com
Miguel Chavira
December 11, 2023 10:47
Hello just to comment about a GE lightspeed 16 slices tomograph that has an artifact problem in the image I already ran the test in das tools and it s...
C Walker
February 07, 2020 10:24
Have a carm no image no output when you first fluoro the meter senses radiation then goes flat black image and ramps to max on screen but no output H...
Nathanael Rodriguez
September 19, 2019 10:04
Does anyone has seen this error before Unable to save image from the Digital Pan hardware No image data was available The detector is good because I ...
Tibor Ivanszky
June 23, 2019 03:03
Dear Friends I need your help in troubleshooting of the Osteometer Bad Image quality and wrong BUA values observed Swapping the transducers ultrasoun...
Marvin Alfonso Guerrero Posso
April 03, 2017 01:24
Dear all Please help me I have problem a Kodak CR 900 With low contrast image That the problem is half of the image is in black and half white I ...
Extensive inventory of Philips & Siemens MRI & CT used-tested, refurbished parts. Knowledgeable Sales and Inventory Team. 90-Day Warranty. Bilingual Support. Competitive Pricing. Technical Support. ISO Certified. parts@keimedicalimaging.com
Posted by an Anonymous December 09, 2015 08:49
Hello I have problem in ge ct system model lemage suprem there artifact in image and when did air calibration give me SD error And there serculer in...
Eren ARIKAN
October 07, 2015 08:07
I have a collimator positioning problem with Genoray Zen 5000 C-Arm When I started up the device at the x-ray tube is positioned at foot level ther...
Michael Fisher
July 02, 2013 06:01
I recently replaced the tube on a GE 2000 D mammo unit and it calibrated accordingly However when I performed the Flat Field it failed MTF and ROI I...
CARLOS RUEDA
December 14, 2012 11:36
Hi There My problem began with Hard disk failure on a ADC SOLO DIGITIZER Ive replaced this HD and reinstalled the OS and looks fine but the images ar...
Blurred image In Paediatric TEE Probe philips make
Manesh Madhavan
January 30, 2008 01:42
Dear All We are having a pediatric TEE probe of Phillips make which we brought about 3 years aback This one is giving a blurred image when on doing T...