Meena Medical Equipment Inc. closeout auctions take place on DOTmed.com. Bid today on 109 lots of medical equipment. Inspection is welcome. Please click email seller or contact mme@meenamedical.com or 817-283-1640.
Joseluis Morales
February 16, 2024 10:49
Hello I need to calibrate my planmeca promax classic cephalometric image it seems i need to do a full beam alignment i have the calibration kit but...
victor lucero
June 05, 2015 10:15
Hello again Can somebody tell me how can I improve CM XCALIBER 1000 Image quality I have an AGFA CR with panoramic software fully calibrated ...
Nathanael Rodriguez
September 19, 2019 10:04
Does anyone has seen this error before Unable to save image from the Digital Pan hardware No image data was available The detector is good because I ...
Ivan Bakhvalov
March 06, 2020 10:20
No exposure with KVError Message after repairing Generator200M Ohm Resistor Can anybody send me service manual or some instructions how to calibrate K...
Roberto Rustici
March 29, 2022 09:51
Hi after 15 month of NO use of the k2100 at the first shot I got E 11 it woks before As the service manual tells I tried to make the self calibrati...
Posted by an Anonymous June 26, 2023 10:43
I have a planmeca 3D classic pan ceph at arm scara calibration appears error 422 423 424 shoulder sensor elbow sensor and c Arm sensor can this b...
Posted by an Anonymous June 28, 2022 10:17
I have Kodak 8000 Carestream Pano whenever turned on always shows different errors- sometimes shows E15 E53 or cooling tube although we do not use rad...
Randy Coppernoll
January 16, 2019 09:21
I have a replacement head for Kodak 8000C we can fix oil leak I need instructions to calibrate the head of the Kodak 8000c Have instructions how to ca...
Marcial Sanchez
October 18, 2016 06:39
Hi- one of my Kodak 8000C got E-4 every time we pressed the exposure switch According to the manual CJ664 or radiogenic unit has been replaced without...
OWALDO QUISPE PEREZ
April 23, 2019 11:13
I need service manual panoramic rx planmeca PM2002 CC ...
Marcial Sanchez
October 05, 2021 10:09
My CS 8000C is not capturing image Once I pressed the exposure switch the message pop up saying Problem with image reception I replaced the digita...
Marcial Sanchez
March 19, 2015 04:49
Hello I have CS8000C The panoramic image is no problem but if we use the Cephalometric either blurred or no image at all it just white image only we h...
edvin zhupa
January 20, 2014 10:19
I need the schematic of instrumentarium op 10 thank you...
Raj Batra
July 18, 2025 10:57
Hello I am receiving e53 error message in my Kodak 8000 panoramic I have removed popped out the battery but the new U15 battery carestream sent me do...
carestream 5700 calibration prints
tomer tsohabany
November 29, 2019 02:18
hi i have 2 printers carestream dv5700 one of them make a calibration every few hours the second one oce a day i try to change the tray but still ...