have you checked to see if you have an image on the II if so then check the CCD power supply board and see if 4 LED are lite.
please email me with what you find and i will try to help you further.
**redacted**
II working fine? Is not check power Supply II checked also video signal From camera to arc normally coaxial video broken try to put external coaxial cable From camera to arc
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Angel Morales
HELP C-ARM STENOSCOP II
May 31, 2016 10:29
I HAVE a C.
IF THERE X RAYS.
BUT I HAVE NO IMAGE
ON SCREENS.
Fluoro and X RAY UNSEEN.
IMAGES ONLY SAVED.
ANY help will be appreciate
to rate and post a comment
Lenny Place
re: HELP C-ARM STENOSCOP II
May 31, 2016 06:54
have you checked to see if you have an image on the II if so then check the CCD power supply board and see if 4 LED are lite.
please email me with what you find and i will try to help you further.
**redacted**
to rate and post a comment
Francesco Didonato
re: HELP C-ARM STENOSCOP II
May 31, 2016 06:54
II working fine? Is not check power Supply II checked also video signal From camera to arc normally coaxial video broken try to put external coaxial cable From camera to arc
to rate and post a comment