- Location: TN, USA
- MFG: SYNTHES
- Model: Mixed lot of 44 pieces
- Type: Surgical Instruments
44 Piece lot of mixed Synthes/Swiss/DePuy Surgical instruments. We are currently unable to sell or ship this item to California. This item will only ship to a U.S. address. A signature may be required upon delivery. All items are in good used/preowned condition.
The following items are included:
1 Depuy Synthes 280.470 Orthopedic DHS DCS Lag Screw 14.0MM THREAD/70MM
1 Synthes 03.503.039 Plate Cutter for Midface Instruments
1 Synthes 394.41 Orthopedic 14.0mm Large Threaded Rod Spindle 13"
1 Synthes 338.200 Coupling Screw Adapter For DHS/DCS
1 Synthes 280.20 DHS/DCS Lag Screw 12.7MM THREAD/120MM
1 Synthes DHS Angle Guide 338.01
1 Synthes DHS Angle Guide 338.03
1 Depuy Synthes 2905-48 Bone reduction forceps
2 Synthes Swiss 319.97 Screw Holding Forceps
1 Synthes Swiss 03.037.015 Aiming Arm Locking Device
1 Synthes 338.41 Swiss 95 degree DCS drill Guide
1 Synthes 355.36 Threaded Extraction Hook For 11mm and Larger Nails
1 Synthes 394.04 Connecting bolt device
1 Synthes 03.120.024 NUT FOR PULL REDUCTION DEVICE FOR 4.3MM PERC. DRILL GUIDE
1 Synthes 314.43 Holding Sleeve
2 Synthes Swiss 313.98 Holding Sleeves
1 Synthes 309.006S Carbide Drill Bit 6.0mm
1 Synthes 319.006 Depth Gauge Cover Sleeve
1 Depuy Synthes D227480000 Pinnacle Revision Peripheral Drill Guide
1 Synthes/Swiss 319.98 forceps
1 Synthes 338.18 Orthopedic DHS Short Centering Sleeve
1 Synthes 241.35 ONE-THIRD TUBULAR PLATE WITH COLLAR 5 HOLES/61MM
1 Synthes 241.351 LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 5 HOLES/57MM
1 Synthes 355.11 Bolt, Conical for Universal Tibial Nails 11-15mm Diameter 355.11
1 Synthes extraction bolt with no part number
1 Synthes 03.127.011 STOPPER FOR 3.5MM VA-LCP PROX TIBIA PLATE AIMING ARM
1 Synthes 309.470 Spare Centering Pin for Hollow Reamer (309.450)
1 Synthes 241.23, 3.5MM T-PLATE 3 HOLES HEAD/ 3 HOLES SHAFT-OBLIQUE ANGLE
1 Synthes 360.253 Holding Sleeve locking device (sleeve only)
2 Synthes 03.037.004.01 Sleeves
1 Synthes Surgical Pin Cutter part N/A
1 Synthes, Swiss 391.74 Bolt Cutter Head for 5.0 mm fixation pins
7 New Synthes 351.06 Centering Pins 4.0mm x 400mm. These are New 6 are in open packages, 1 has no package.
2 Synthes 309.670 Spare Centering Pins For Hollow Reamer
Disclaimer: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
International: No international shipping on this auction unless you provide a U.S. ship to address. Buyers are responsible for all customs charges inclusive of any and all taxes and duties. Please be sure that the item that you are purchasing can be imported into your country. Shipper is not responsible for any delays once the package leaves our facility.
For medical devices that can only be sold with government authorization: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
The equipment is staged and operational, but is not in clinical use. All items should be re-certified before use.
Availability:
The equipment will be available immediately upon receipt of payment in full.
Inspection:
You are free to inspect this equipment but if you want to inspect the equipment please do so before you bid. If you would like to arrange to inspect this equipment click on "Email Seller" above.
The equipment is located in Jasper, TN.
Terms:
At the close of the Auction, the Winning Bidder will receive an email introducing the Winning Bidder to the Seller.
The Winning Bidder agrees to make contact with the Seller within one business day of the close of the Auction and to remit payment in full within three business days of the close of the Auction.
If the Winning Bidder fails to make contact with the Seller within one business day or to remit the payment within three business days then the auctioned item may be sold to the next highest bidder and the Winning Bidder may be negatively rated, banned from and Blacklisted on DOTmed and charged a penalty equal to
$2000 or the amount of the winning bid whichever is less.
Deinstallation, packing, crating and transportation will be paid by the Winning Bidder.
Title will transfer to the Winning Bidder upon payment in full.
Warranty:
This equipment is offered in accordance with the "Auction Terms" and "Legal Notice" of www.dotmed.com. No warranty is expressed or implied, including any warranty of merchantability or fitness for a particular purpose. All equipment is sold "as is" and "where is".
Questions about this auction
There have been no questions regarding this auction yet.
Ask a question.
