Hello friends,
I have problem with the gantry rotation. There is a strong noise while rotate.
There was a flood and flooded to the height of half of the rings.
I took out the brushes, drive motor and the noise don´t disappear. The noise is on main bearing. I am thinking lubricate this part. Any suggestion?
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
MIGUEL ANGEL TORRES MARTINEZ
SOMATOM EMOTION 6 2003
March 06, 2017 08:07
Hello friends,
I have problem with the gantry rotation. There is a strong noise while rotate.
There was a flood and flooded to the height of half of the rings.
I took out the brushes, drive motor and the noise don´t disappear. The noise is on main bearing. I am thinking lubricate this part. Any suggestion?
to rate and post a comment
Marshall Shannon
re: SOMATOM EMOTION 6 2003
March 07, 2017 10:14
I am thinking replace the gantry or main bearing
to rate and post a comment
Dmitry Dederer
re: SOMATOM EMOTION 6 2003
March 07, 2017 10:21
Hello, sir! Try to lubricate the main bearing using Kluber Topaz NC25.
to rate and post a comment
Marshall Shannon
re: re: SOMATOM EMOTION 6 2003
March 08, 2017 09:10
you see it was flooded over a foot deep? how long?
to rate and post a comment