For Sale HILL-ROM Hill Rom Affinity P3700 Oem Headboard Head Board Panel With Inserts Beds - Misc. Parts P/N P3629BM07

About This Item
Reconditioned part from fully tested machine, inspected thoroughly. Only what is shown is included. Guaranteed functional and guaranteed for 30 days


Know What You are Buying

We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Hill Rom

Part # P3629BM07

SKU: 116297



TESTED Parts – these parts were all tested and confirmed functional in all modes in our professional shop before parts harvest. Machine was Hill Rom Affinity P3700 / IPX2 Machine

Description – Oem Head board blow molded panel as shown. May have surface defects on the panel (see picture). Pin center to center is appx 17.75 inches and pin total length of 7 inches with3 inch insert depth. Includes the nylon insert for the stock steel pin. Oem dims are Product Weight: 8.525 lb.

Product Height: 1.5 in. Product Width: 22.3 in. Product Depth: 30.0 in.

Comps – All Hill Rom Affinity P3700 Series machines – that fit the above pin dimensions (only) - including AFFINITY 1 AFFINITY 2 AFFINITY 3 AFFINITY 4 AFFINITY THREE BIRTHING BED P3700

Other Numbers – P3629AROK P3629BROK P3629B084 P3629B734 P3629B157 P3629B70T P3629B705 P3629B293 P3629BMOK P3629BWM9 P3629B935 P3629B P3629B462


Thanks for looking!

Return Policy

5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender. If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item. NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.