For Sale COLIN 8800 8800C PRESSMATE BP Monitor

(1) PRE-OWNED AND IN GOOD CONDITION
COLIN BP-8800C SPHYGMOMANOMETER WITH THERMOMETER MODULE MODEL #8000F

SERIAL#: AS301502 & F100961 (Thermometer Module)


*This Unit Has Been Thoroughly Inspected AND Tested By Hamel Medical in Yukon, OK And Is Biomedically Certified Until July 2011.

It Is Ready To Go To Work In Your Office Or Clinic Today!!*


THIS OFFER INCLUDES (Used):

(1) COLIN BP-8800C MONITOR
(1) TEMPERATURE PROBE
(1) NIBP CORD
(1) NIBP ADULT CUFF (25 - 35 cm)
**Does Not Include Power Cord**

*Please Note that the pics are representative of this equipment.


The Press-Mate BP-8800C is a convenient automatic Non-Invasive Blood Pressure Monitor.

All the pressure values and the Pulse Rate are displayed on large bright LEDs. In addition, the Press-Mate displays the last four sets of Systolic, Diastolic, and Pulse Rate values on LCD display. Various error messages can also be displayed on this LCD. The pulse level indicator gives visual confirmation of accurate cuff placement.

The Colin Press-Mate Model: BP-8800C is a stand-alone, non-invasive blood pressure (NIBP) monitor for adult, pediatric, and neonatal patients. Colin Press-Mate Model: BP-8800C is intended for use in a wide variety of health care settings.


FEATURES:

-Clock: shows actual time and the time elapsed since the most recent measurement.

-List Memory: Up to 400 sets if values can be stored in memory for review or printing.

-Data Storage: Operators can find stored data whenever required.

-Alarm: audible alarm for Systolic, Diastolic, MAP and Pulse Rate values.

-Alarm setting: Set to the operators required high and low limits.

-Measurement: initiated both through manual operation, and through use of the interval timer.

-Interval timer can be set from continuous to 180 minutes.

-Built in Battery: in battery mode, measurements can be taken up to a limit of four hours (without printer operation).When a battery needs charging, the appropriate message is shown on the LCD display.

-Data Output Terminal (RS-232C): external interface terminal (RS-232C) on the rear panel.

-Stand Attachment: easily attached to any standard IV pole or drip stand. (Stand Not Included In This Offer)


Measurement Intervals:
Press Switch To Set Choice Of 14 Blood Pressure Measurement Intervals Or Consecutive Measurement Mode.

Memory:
The Monitor Stores 152 Vital Sign Measurements. The Last Four Are Always Displayed In The LCD Window.

Press To View Memory. Press Simultaneously For Three Seconds To Clear Memory.

Alarms:
Alarm Sound Is Selectable For 10 Seconds Or Continuous. Press To Silence.

To Set Alarms, Press Switch. Look At LCD Window. Set Upper Systolic Limits By Pressing Switch. Set Lower Limits By Pressing Switch. Repeat Steps For Other Alarm Values. Press Switch To Exit Alarm Menu.

Special Features:
To Select Features, Press Switch And Switch Simultaneously For Five Seconds.

Menu Appears In LCD Window. Set Clock, Date, Alarm Mode (Ten Seconds Or Continuous), And Initial Inflation Pressure In This Mode. Press Switch To Scroll Cursor To Feature And Set Feature By Pressing.

*This Unit Has Been Thoroughly Inspected AND Tested By Hamel Medical in Yukon, OK And Is Biomedically Certified Until July 2011.

It Is Ready To Go To Work In Your Office Or Clinic Today!!*


30-DAY WARRANTY


*ADDITIONAL UPS GROUND SHIPPING COST OF $29.95 INCLUDES INSURANCE AND DELIVERY CONFIRMATION WITHIN THE CONTINENTAL USA*

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.