Orthoscan HD Model 1000-0004 Digital Detector Mini C-Arm
The Orthoscan FD is Orthoscan's first Mini C-Arm detector with a flat detector. The flat detector's modest form factor provides the best placement in a surgical setting. The flat detector enhances image quality and improves diagnostic accuracy. With the user-driven design, optimum image quality is possible with minimal effort.
C-Arm Specifications
Free space: 14″
Arc depth: 19.2″
Auto and manual fluoro modes
Pivot: 380°
Lateral rotate (wig-wag): 320°
Orbital rotate: 120°
Vertical range: 41″
Distance to cabinet: 65″ maximum
Distance to wheel base: 42″ maximum
Flat Detector
Detector resolution: 2k x 1.5k
Field of view: 15.0 cm x 12.0 cm
Useful array: 145mm x 115mm
Pixel spacing: 75 microns
DQE at 59.5 keV (IEC standard): 70%
Dose rate: AKR, DAP
Imaging
Temporary image hold: 512 images
Snapshot capabilities
Frame rate: 30fps
Anode adaptive noise suppression
4 mode manual noise suppression
Laser alignment device
Sterile field controls
Infrared footswitch available
Monitor
View area: 20.1″
Primary “live” image: 10″ diameter
Dual secondary images: 4″ x 4.75″ each
Resolution: 2-megapixel, monochrome TFT LCD
Built-in DICOM calibration
Height adjustable with left/right swivel
Extendible monitor arm: 27″ range of motion
Monitor handles
Dimensions
Weight: 400lbs
Height: 44.5″
Width: 29″
Length: 37″
This is a very nice system that we just removed from service. Tested to make Xray. Beautiful image quality.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.