Unit is used and has been tested and it was found to be completely operational. Crating and shipping are extra and are not included in price. Installation not included in price.
SRX-101A Tabletop Film Processor with stand and tanks
Manufactured in 2012
The SRX-101A tabletop processor offers variable speeds which can be set from within the processor. This allows you to choose the optimum cycle speed to match your processing needs. Konica Minolta's 90 second cycle allows fast developing of all super rapid processable films.
Control Panel
Depending on your space requirements, the control panel can be situated on either side of the processor. The SRX-101A plugs into any dedicated 110V outlet so that no special wiring is needed.
Innovative Design
An innovative rack design and smooth plastic tanks make periodic cleaning remarkably easy and simplifies routine maintenance. The SRX-101A incorporates a quite operating infrared drying system for consistent drying of radiographs, and a light tight feed tray cover permits the operator to leave the darkroom during the film feed.
Dimensions: (W x D x H)
610 x 680 (900 including feed tray) x 452 mm
24 x 26.8 (35.4 including feed tray) x 17.8 inch
Weight:
88 lb (103.4 lb with processing solutions)
40 kg (47 kg with processing solutions)
Process Speeds:
90 Second Super Rapid Processing Cycle
120 Second Standard Processing Cycle
180 Second Extended Processing Cycle
Capacity:
A 17" wide film transport system provides faster film feed for larger radiographs, or two 8" x 10" films (or smaller) can be processed side by side. Up to 75 10" x 12" or 60 14" x 17" films can be processed per hour at the 90-second processing cycle.
Electrical:
Operates on standard 110V power through any wall outlet.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.