For Sale BIO-RAD Bio-Plex 200 Flow Cytometer

For Sale Bio-Rad Bio-Plex 200 w/ HTF Suspension Array System Analyzer Unit 2

• Fully Functional
• Serviced & in Stock
• Current Model
• Good cosmetic condition
• Technical sales consultation available
• CONTINENTAL US 120 DAYS WARRANTY & 60 DAYS INTERNATIONAL
• Includes remote instrument setup and training session

________________________________________
Here is what you will receive:
• BioRad Bio-Plex 200 (Luminex 200)
• XYP Microplate Stage
• HTF Sheath Delivery System
• Computer running BioPlex Manager software version 6.2 with a USB license dongle
• Waste and sheath fluid hoses for use with bulk containers
• Communication, power cables, and hoses.

Bio-Plex 200 Suspension Array Analyzer Configuration:
• Number of Lasers: 2
• Laser Type: Reporter Laser 532nm and Classification Laser 635nm
• System checks for type of bead and if bead has analytes attached to it
• Bead compatibility: MagPlexC, MicroPlex, LumAvidin, xTAG
• Applications: mid-throughput
• Sample Handling: system uses 96 well-plates, no thicker than 0.75 in.
• Read time: ~40 min/96-well plate
• Dynamic range: 3.5 logs
• Sample Volume: 25 - 80uL
• Sheath flow rate: 90 ul/sec
• Cuvette: 200 um square flow channel
• Sample injection rate: 60 ul/min

Customization/Options: N/A

Testing performed by our in-house service team:
The Bio-Plex 200 Suspension Array Analyzer passed all tests and was found to be fully functional:
• We test the operation of the software communication.
• We evaluate the functionality of the pneumatic pump and calibrate the air pressures to the specified requirements.
• We assess the performance of the probe and its actuator to ensure proper operation.
• We clean and test the HTF sheath fluid module for operational efficiency.
• We perform a deep cleaning of the fluidics system.
• We analyze the functionality of the sheath fluid valves within the system.
• We inspect and test the XYP microplate stage module.
• We perform the calibration procedures for both lasers, including Cal1 and Cal2.
• We carry out all recommended cleaning and flushing protocols, which include Prime, Wash, Sanitize, Alcohol Flush, and Soak.
• We perform the calibration procedures and obtain passing results, verifying that all subsystems are operating together as intended.

Instrument Overview:
• Bio-Rad Bio-Plex 200 w/ HTF Suspension Array System enables multiplex biomarker detection in a single sample.
• Uses bead-based flow cytometry for simultaneous quantification of multiple analytes.
• Provides high-throughput capability with HTF system for increased sample processing.
• Delivers accurate and reproducible results across a wide dynamic range.
• Bio-Rad Bio-Plex 200 w/ HTF Suspension Array System supports flexible assay formats.
• Compact analyzer design integrates efficiently into laboratory workflows.

Instrument Application:
• Cytokine Profiling
• Autoimmune Disease Research
• Vaccine Development
• Cancer Biomarker Discovery
• Infectious Disease Diagnostics
• Pharmacokinetics Studies

The Key Features:
• Multiplex up to 100 analytes per sample
• Uses Luminex xMAP bead-based tech
• Compatible with diverse assay types
• Delivers quantitative protein analysis
• Includes automation for high throughput
• Software for robust data interpretation

CRITICAL TECHNICAL STEPS WE TAKE TO ENSURE INSTRUMENT PERFORMANCE & CUSTOMER SATISFACTION

They want to ensure the cytometer undergoes full fluidics system decontamination, flushing, and inspection to protect the valves and flow sensors from damage.
________________________________________
They want to ensure the cytometer has no residual sheath salt buildup in the flow cell, which could skew scatter data and, if improperly cleaned, can damage the flow cell.
________________________________________
They want to confirm that all detectors, including doublet detectors, can be aligned and calibrated for particle sizing and granularity resolution.
________________________________________
They want assurance that baseline performance has been verified using standardized particles, with data or log files available for review.
________________________________________
They want to confirm that electronic noise and EMI levels at the detector/amplifier stage remain within tolerance and will not distort signal fidelity.
________________________________________
They want to confirm that no power degradation or misalignment in laser paths is detected through precise mW-level measurement at the final optics output.
________________________________________
They want to ensure that optical filters and dichroic mirrors have been inspected for delamination, spectral shift, or contamination that could compromise signal specificity.
________________________________________
They want to ensure the sheath flow and pressure are properly set, ensuring proper sample rates and sensitivity.
________________________________________
They want to ensure the system passes automated QC and performance tracking with reproducible CVs for bead standards across multiple channels.
________________________________________
They want to ensure the fluidics pump assembly does not exhibit pulsation, drift, or backpressure due to check valve wear or micro-leaks.
________________________________________
They want peace of mind, knowing their instrument is backed by a warranty from a company that can stand behind it.

Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping. see the questions section below
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Technical sales consultation available
• Remote installation and instrument operation training may be available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee
• Warranty
• An extended warranty may be available
• You get after-sales technical support
• Customer references are available
• The instrument will be fully functional!
• Smooth process from the initial quote to order fulfillment

________________________________________
This will ship via freight. Please contact us with your zip code to obtain a shipping quote.

*SM* Small Crate
300#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.

DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.

ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.