For Sale MEDIGLIDER 4 Patient Transfer Gurney Prototypes Gurney

4 Medical Patient Transfer Fully Automative Gurney Prototypes.

Sell CURRENTLY PENDING until Friday 05/23

Each bed requires 2 AGM batteries, Batteries are not included with sell. Each bed is high-end quality new technology transfers up to 500 pounds per patient.

New sheets and manual included. All 4 beds are minimally tested each bed is like-new. These beds were made for demonstration by the Mediglider team. All beds have not gone through FDA approval. Beds are being sold as a prototype as they were the finished prototype before main manufacturing. Each bed is estimated to cost 25K to manufacture 70k MSRP each.

I am not affiliated with Mediglider

Being sold as a non-medical item

PRODUCT FEATURES
Dual Powered Patient Conveyor Belts
Power Drive Propulsion System - Dual drives-opposed, counter articulating; Forward—variable 0-3.2 km/hour (0-2 miles/hour), joystick control; Reverse-variable 0-1.6 km/hour (0-1 miles/hour), joystick control
• Power Lateral Drive — 90° to drive position; Multi-directional-Variable O$1.6 km/hour (0-1 miles/hour), joystick control
Power Turning - 73.6 cm (29.0 in.) turning radius
Spin - 360° with joystick or push buttons
Stow Wheels - Emergency only; powered or manual push using guard rails Operator Controls - Dual, on each end of the MediGLIDER Product Sanitation Alert - Flashing lights after patient move is complete Caster System - Four (4) dual wheel with spring shocks
IV Pole Placement - Four (4) integrated holders, one on each corner
Foley Hooks - Four (4), one at each corner
Braking - Dual-automatic
Alignment Guides - Four (4) cross lasers

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.