PATHFASTTM is an in vitro diagnostic medical device designed for use in near patient testing (NPT). PATHFAST is a small, easy-to-use, multi-analyte instrument that provides in vitro quantitative determinations using whole blood, plasma, serum, or other body fluids determined by the protocol of the test being run. PATHFAST is used by laboratory technician, nurse or physician, in hospital including emergency room, doctor’s office and clinical laboratory. Reagents used with PATHFAST have been developed and manufactured in specially prepared cartridges by LSI Medience Corporation. The principle of measurement employed for the reagent system is CLEIA (Chemi-Luminescence Enzyme Immuno-Assay). The PATHFAST instrument utilizes Magtration® technology for Bound/Free (B/F) separation in several reaction steps.
About:
1. Compact Space-saving design.
2. Full-automation Fully automated processing of pipetting samples, reaction
with reagents and detection.
3. Samples Whole blood, plasma, serum, or other body fluids
4. Multi-item Processing
Up to six different samples or up to six different items in a
batch can be assayed.
5. Short Assay Time Less than 17 minutes (depends on reagent protocol)
6. Easy to Use Specially prepared prepackaged reagents and disposables
make easy to run assay operation. No water, wash solution or waste bottles are needed. PATHFAST is a near patient testing (NPT) device.
7. High Sensitivity/Accuracy/Reproducibility Small amount of materials can be detected by using photon counting method with high accuracy and good reproducibility.
8. Minimum Cross Contamination Possibility of cross contamination among samples is minimized because of mono-test type reagents and disposables.
9. Bar-code Control Assay items, factory-set calibration data and reagent expiration date are given by reagent barcode. Sample ID and User IDs are also available through Handheld Barcode Reader.
10. Sample Recognition Sensor Whole blood can be automatically differentiated from serum or plasma by the sample recognition sensor.
Specifications
Class of device: Class-A, near patient testing (NPT) device
Instrument Type: Bench-top
Throughput Samples: Maximum 6 samples/batch
Process Time: Less than 17 minutes*/6 samples
* Depends on protocol of each assay item, refer to package inserts.
Type of Samples: Whole blood, plasma, serum, or other body fluids
Temperature Control Heat Block L : 37.5, Heat Block T : 35
Handling Volume: 20-700ul
Dispensing Accuracy: 50ul- CV less than or equal to 2%
Wavelength: 300-650nm (PMT Sensitivity Peak : 45050nm)
Data Storage: Patient Data: 1000, QC Data : 1800, CAL Data : 300
Power Requirement: 100 - 240 VAC, 50/60 Hz
Power Consumption: 360 VA
Protection against electrical shock: class 1, type B
Size: W343x D569 x H475 mm
Weight: About 28kg
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
Get a CPS 2-Year Protection Plan starting at $5.99. Sold separately. Learn more
