For Sale INFORS HT Multitron Pro Incubator

For Sale Infors HT Multitron Pro Triple Incubator Shaker with Humidity & Cooling Control Unit 9

• Fully Functional
• Serviced & in Stock
• Multiple triple-stack incubators on hand
• Good cosmetic condition
• Technical sales consultation available
• CONTINENTAL US 120 DAYS WARRANTY & 60 DAYS INTERNATIONAL
• Includes remote instrument setup and training session

• The extra maintenance we perform in-house (in addition to testing steps):
• Chambers cleaned thoroughly
• Tested with NIST Traceable Calibrated probes
• Replace bearings in all three shakers (new)
• Replace the belts in all three shakers (new)

This service adds between 30 to 35 hours of technical labor and is included at no charge
Here is what you will receive:
• Infors HT Multitron Pro Refrigeration/Humidity Triple Incubator Shaker
• Shaker Trays for Microplates (Qty:3)
• Drain Plug (Qty:3)
• Drain Fitting with Tubing (Qty:3)
• Power Cables (Qty: 4)

Infors HT Multitron Pro Triple Stack Incubator Shaker Configuration:
• Capacity: approx 200 Liters Per Chamber
• Standard parameters: temperature, rotation speed, timer
• Included Options: Humidification, Cooling
• Control accuracy: +/– 0.1%
• Temperature Range with top cooling: 12 DegC under ambient temperature up to 65 DegC
• Humidity Control range: 20 ... 85% rH
• Max. temperature with humidification: 40 DegC
• Each chamber Interior: Width 925mm (36.42") x Depth 550mm (21.65") x Height 387mm (15.24")
• Weight: appr. 390 kg (860lbs)

Throw Configuration Options
Shaking throw: 25 mm
• Shaking Range: 20-400 rpm, bottom shaker: up to 400 rpm; middle shaker: up to 350 rpm; top shaker: up to 350 rpm

Shaking throw: 3 mm
• Shaking Range: up to 999 rpm, depending on the load and stack.

Customization/Options:
• Shaking diameter (Throw) can be set for 3mm for microplates (up to 999 rpm) or standard 25mm (up to 400 rpm) (Please inquire)
• Universal trays with threaded holes to accept flask clamps that are screwed into place
• Tables with adhesive matting (sticky stuff) for any item with a flat base
• Special holder for microtitre and deep-well plates
• Carboy for water supply to the humidity generators
• Retaining clamps and holders
• Test tube racks

Testing performed by our in-house service team:
The Infors HT Multitron Pro Triple Stack Incubator Shaker passed all tests and was found to be fully functional:
• We ensured the instrument powered on smoothly without errors.
• We tested all interface controls.
• We tested the temperature of each chamber with a NIST traceable calibrated probe (65DegC).
• We tested humidity generation and RH sensors with a NIST traceable calibrated probe.
• We verified cooling efficiency to ensure the set values are achieved and maintained.
• We verified the uniformity of temperature distribution throughout the unit.
• We assessed the performance and consistency of orbital shaking till maximum RPM for each chamber.
• We inspected the condition of the main door gaskets.
• We tested the door safety shutoff.
• We performed a stress test with simulated under-load conditions.

Instrument Overview:
• The Infors HT Multitron Pro offers control of temperature and humidity, which is ideal for cell culture.
• Equipped with triple incubator shakers, it allows simultaneous shaking of multiple microplates in different environmental conditions.
• It provides a large shaking capacity with adjustable speed settings to accommodate various experimental requirements.
• The humidity control system ensures consistent conditions, minimizing evaporation and maintaining sample integrity.
• The integrated cooling system ensures stable, low temperatures for various experiments.
• Designed for reliability, the Multitron Pro is suitable for both routine and advanced research applications.

Instrument Application:
• Cell culture growth optimization
• Cell culture incubation
• Microbial fermentation
• Protein expression
• Enzyme activity studies
• Temperature-sensitive assays

The Key Features:
• Triple stack design for high throughput.
• Independent control over each stack.
• Cooling and humidity control
• Precise temperature regulation
• User-friendly touchscreen interface

Why do so many customers choose to order from us?

Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping. see questions section below
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Technical sales consultation available
• Remote installation and instrument operation training may be available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee
• Warranty
• You get after-sales technical support
• Customer references are available
• The instrument will be fully functional!
• Smooth process from the initial quote to order fulfillment

________________________________________
This will ship via freight. Please contact us with your zip code to obtain a shipping quote.
1200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.

DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.

ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.