For Sale OHMEDA Ohmeda Giraffe Omnibed Incubator Oem Air Flow Sensor With Cable Tested Infant Incubator Parts P/N 6600-0820-700

About This Item
Actual item shown, removed from tested working machine by professional technicians and re-certified for dependable daily use. Only what is shown is included. Please contact us if you have specific part related questions.

Know What You are Buying

We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Ohmeda
Part # 6600-0820-700
SKU: 116507



Note-Our parts are in-stock! Ships from our warehouse immediately. Removed from bed tested & working properly before parts harvest. This is a fully tested part.



TESTED Parts – these parts were all tested and confirmed functional in all modes in our professional shop before parts harvest. Machine was GE Healthcare / Ohmeda Medical Giraffe Omnibed 6651-0008-901 with S/N HDHJ50111 w/ Ebase Eng S-HUMID S-HOOD

Description – WIRE HARNESS AIR FLOW SENSOR ASSEMBLY / From Mfgr - The Wire Harness Air Flow Sensor Assembly consists of an optical transducer reflective sensor, MTE pin housing and MTE pin that are assembled together. An optical transducer is a type of sensor which converts one form of signal to another form. The sensor is covered by black thermoplastic housing. When the reflective object passes within its limits the sensor responses to the radiation from IRED. The MTE pin is the interconnector which connects the sensor and board together. This type has 5 pins and has 5 wire outputs.

Comps – Ohmeda Giraffe Omnibed Family Machines

Other Numbers – 66000820700

Thanks for looking!

Return Policy

5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender. If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item. NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.